Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Search the maintenance guides for answers to 99.999% of Omega questions

Pages: 1 [2]  All   Go Down

Author Topic: Expansion tank hoses 2.8T Sigvec.  (Read 4148 times)

0 Members and 2 Guests are viewing this topic.

Field Marshal Dr. Opti

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Utopia
  • Posts: 32559
  • Speaking sense, not Woke PC crap
    • View Profile
Re: Expansion tank hoses 2.8T Sigvec.
« Reply #15 on: 22 August 2015, 13:54:08 »


The new hoses are marked GM 12842477 and GM 12842478.

Getting back on topic, the new ones I fitted on my car have the above part numbers printed on them, so they are the correct ones

Phil, my understanding is that the new hoses fit the revised coolant tank and are not the same as the hoses used for the previous tank.

I still have the old tank........which is not leaking as of yet. :y
Logged

Phil

  • Senior Member
  • ****
  • Offline Offline
  • 0
  • Posts: 799
    • View Profile
Re: Expansion tank hoses 2.8T Sigvec.
« Reply #16 on: 25 August 2015, 08:37:32 »

Phil, my understanding is that the new hoses fit the revised coolant tank and are not the same as the hoses used for the previous tank.

I still have the old tank........which is not leaking as of yet. :y

Fairly sure the pipes are the same.

Think I swapped the pipes over a couple of days before changing the expansion tank and there were no issues.

They are an odd pipe in as much that the old ones tapered where they were connected to a smaller ID think the new ones are a more uniform diameter
Logged
Pages: 1 [2]  All   Go Up
 

Page created in 0.013 seconds with 17 queries.