Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Terbs]

Does anyone know the dimensions of the locking plate spring used on a facelift Omega ashtray housing. As there were no responses to another members wanted ad for a housing, I am going to try to repair mine. Basically, I am going to manufacture a peg, but I don’t have the spring. There are loads of torsion springs on the bay of thieves, but I don’t know the dimensions and strength needed. Any help would be appreciated 

[YZ250]

Shame that I can't understand a word this chap is saying as it might have helped a bit, but if you speak Turkish you may be alright.    I thought seeing the design of the spring may help. 

https://youtu.be/OFN0UqfDrJU?si=ypXLrLZXIEBrdcjm

[Terbs]

Thanks Al, but that's the wrong spring, mate. It's the one under the locking plate I need. I've got a rough idea of the size by looking at the guide on here. I am assuming it only needs enough tension to allow the locking plate to flip back on opening. Thanks anyway

[YZ250]

Ah yes, I just looked at the RobG guide and see what you mean.