Many. many thanks to all, and especially Chris, Mark and TB, that gave me great advice on the fault codes that were showing after I had done my cam cover gaskets along with oil breather system!!

Yes!! I had trapped the knock sensor wire between the passenger side bank cam cover and the engine, nicely shaffing the cable!!!

Your wonderful advice pointed me in exactly the right direction, with my mistake becoming very obvious once I had stripped the plenium and everything else back off. Without that advice I would have been searching for a lot longer than I was!

If you were near me it would be all kisses and cuddles

Talk about being overjoyed with sorting out the problem! 8-) 8-) 8-) 8-)
Anyway, I had to disturb the cam cover to get the trapped cable free, so although everything is at the moment all reassembled, now I know exactly what to strip off and how, I am going to re-do the disturbed cam cover, resealing it, then do a complete service with the parts bought this afternoon along with new intake gaskets. So hopefully this time tomorrow all would be complete and running tickity boo!!

Thanks again and what a great forum this really is!!!
