Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Search the maintenance guides for answers to 99.999% of Omega questions

Pages: [1]   Go Down

Author Topic: VXR alloys on my elite.  (Read 768 times)

0 Members and 1 Guest are viewing this topic.

kingycos2

  • Intermediate Member
  • ***
  • Offline Offline
  • 0
  • Posts: 263
    • View Profile
VXR alloys on my elite.
« on: 26 May 2009, 08:20:50 »

I'm looking at up grading my alloys to VXR snowflakes 18" or 19" or maybe even astra VXR 19". Is there any problems in fitting? and does anyone have any photos of similar alloys? Am i right in thinking 225/40/18 will fit with no rub on the 18"? Cheers...  ;)
Logged

MV6Matt

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • London
  • Posts: 1187
  • Wanting back into the Omega fold..........
    • No car since 2022....
    • View Profile
Re: VXR alloys on my elite.
« Reply #1 on: 26 May 2009, 08:39:51 »

Some one here has the 19" Snowflakes on his met Blue Facelift saloon.
If memeory serves, he only used spacers (through choice rather than necessity but I'm sure he'll correct me if I'm wrong).
As they are for vx vehicles, the Pcd is set right already (5x110).
Your tyre size looks ok to me but again, I'm sure there will be others to correct me if I'm wrong.

Get them on and post in the Gallery! :) :)

Best of luck should look lovely! :y :y
Matthew
Logged
"You only need two tools: WD40 and duct tape. If it doesn't move and it should, use WD40. If it moves and it shouldn't, use duct tape"
(thanks Ian)

Albatross

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Bedford
  • Posts: 2100
  • An LSD & an S2000!
    • View Profile
Re: VXR alloys on my elite.
« Reply #2 on: 31 May 2009, 18:27:22 »

They are Vectra-C SRi 19" Snowflakes not VXR.

They fit straight on.

The spacers added are to help the wheels fill the arches better and I had them even when I had the standard Elite 17" wheels fitted.

The car has MV6 suspension, so it 15mm lower than a standard Elite too.

You should be fitting 235x35x19 to these wheels. My standard tyres were 235x45x19.

I'm thinking about 265x30x19 for the rear, but haven't done it yet. I do know that they fit fine and hte dynamic rolling radius is consistent (within tolerance).

Nathan

« Last Edit: 31 May 2009, 18:29:34 by Albatross »
Logged

STMO123

  • Guest
Re: VXR alloys on my elite.
« Reply #3 on: 31 May 2009, 18:49:34 »

You wont forget to inform your insurance co will you? ::)

They wont pay out if you dont.
Logged
Pages: [1]   Go Up
 

Page created in 0.031 seconds with 17 queries.