Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Pages: [1]   Go Down

Author Topic: HELP! - Now sorted :D :D  (Read 1524 times)

0 Members and 1 Guest are viewing this topic.

ClarCE

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • Newbury, Berks
  • Posts: 735
  • Cam Covers x 5
    • View Profile
HELP! - Now sorted :D :D
« on: 20 April 2007, 12:08:34 »
Got everything set for the weekend to do my Cams and at the last second the tool company I bought the 30mm ring spanner and the E20 torx bit have let me down, wont be here till Monday!! Argh! (wan**rs by the way, diytools.co.uk)

Has anyone got these bits I could borrow over the weekend at all?  This has thrown a serious spanner (excuse the pun) in the works..  >:(
« Last Edit: 20 April 2007, 14:01:15 by ClarCE »
Logged
So Far - :: Re-Finished Elite Wheels :: Black Leather Interior :: 3.0 Cams :: Chipped (REMOVED, EBAY SHI*E) :: Facelift Skirts ::
To Do   - :: Facelift Rear Bumper, Door Mouldings :: Irsmsher Front Air Da

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 34015
  • Git!
    • View Profile
Re: HELP!
« Reply #1 on: 20 April 2007, 12:11:18 »
Mine are due back tomorrow......bit of a treck though....
Logged

nixoro

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Hitchin, Herts
  • Posts: 2902
    • View Profile
Re: HELP!
« Reply #2 on: 20 April 2007, 12:13:27 »
Maybe worth having a look in Halfords they always seem to have the last minute tools I need to do a job maybe worth a look. :-/
Logged

ClarCE

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • Newbury, Berks
  • Posts: 735
  • Cam Covers x 5
    • View Profile
Re: HELP!
« Reply #3 on: 20 April 2007, 12:31:45 »
Mark, thanks but you're right - little bit of a journey up to you!

Nixoro, I'll pop down there on the way home, seriously doubt they'll have a spanner tho :( Maybe they do, fingers crossed.

I think I have an E20 but its not the 1/2 inch drive..
Logged
So Far - :: Re-Finished Elite Wheels :: Black Leather Interior :: 3.0 Cams :: Chipped (REMOVED, EBAY SHI*E) :: Facelift Skirts ::
To Do   - :: Facelift Rear Bumper, Door Mouldings :: Irsmsher Front Air Da

nixoro

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Hitchin, Herts
  • Posts: 2902
    • View Profile
Re: HELP!
« Reply #4 on: 20 April 2007, 12:49:35 »
Quote
Mark, thanks but you're right - little bit of a journey up to you!

Nixoro, I'll pop down there on the way home, seriously doubt they'll have a spanner tho :( Maybe they do, fingers crossed.

I think I have an E20 but its not the 1/2 inch drive..

Have you got any companies like this near you www.bennetts.com I have bought quite few tools from hear and they have been pretty good
Logged

Admin

  • Administrator
  • *****
  • Offline Offline
  • 0
  • Posts: 2595
    • View Profile
Re: HELP!
« Reply #5 on: 20 April 2007, 13:17:35 »
Chris, I may be able to help.

I need to get this spanner myself (I'll get the kit at a later date).

Now I am going down to Toddington Services (J2 M1) tomorrow morning (I'll be there at 8.30am).
I could bring down these tools for you if that would help?


Logged
The Administrator.

ClarCE

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • Newbury, Berks
  • Posts: 735
  • Cam Covers x 5
    • View Profile
Re: HELP!
« Reply #6 on: 20 April 2007, 13:29:00 »
Quote
Chris, I may be able to help.

I need to get this spanner myself (I'll get the kit at a later date).

Now I am going down to Toddington Services (J2 M1) tomorrow morning (I'll be there at 8.30am).
I could bring down these tools for you if that would help?



Cheers LB - I've just been to Halfords - I'm not sure I need to worry quite as much as I just did! (I Hope)

I've got a 30mm socket in my ratchet set, its huge - would this work instead of a ring spanner?  I also have the E20 but in 3/8 form rather than 1/2..  As far as I can see I should be ok, but I'm sure you guys can confirm...
Logged
So Far - :: Re-Finished Elite Wheels :: Black Leather Interior :: 3.0 Cams :: Chipped (REMOVED, EBAY SHI*E) :: Facelift Skirts ::
To Do   - :: Facelift Rear Bumper, Door Mouldings :: Irsmsher Front Air Da

Admin

  • Administrator
  • *****
  • Offline Offline
  • 0
  • Posts: 2595
    • View Profile
Re: HELP!
« Reply #7 on: 20 April 2007, 13:40:11 »
Chris, we recommend an offset ring spanner for a reason mate.... ;)

You need access to the centre whilst holding the outer part still.
With a whacking great socket over it, this will prove to be a bit of a challenge!  ;)

Oh and 3/8 E20 will be fine. Just the 1/2" drive gives you more leverage when turning the crank.
« Last Edit: 20 April 2007, 14:50:39 by admin »
Logged
The Administrator.

ClarCE

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • Newbury, Berks
  • Posts: 735
  • Cam Covers x 5
    • View Profile
Re: HELP!
« Reply #8 on: 20 April 2007, 13:50:44 »
Quote
Chris, we recommend an offset ring spanner for a reason mate.... ;)

You need access to the centre whilst holding the outer part still.
With a whacking great socket over it, this will prove to be a bit of a challenge!  ;)

Oh and 3/8 E20 will be fine. Just the 1/2" drive gives you more leverage when turning the crank.

Damn it!  I knew it would be all too easy  :-/

I'm just waiting on my house mate to get back to me, then I'll let you know if I'll be seeing you at toddington!

Cheers for the advice :)
« Last Edit: 20 April 2007, 15:17:15 by admin »
Logged
So Far - :: Re-Finished Elite Wheels :: Black Leather Interior :: 3.0 Cams :: Chipped (REMOVED, EBAY SHI*E) :: Facelift Skirts ::
To Do   - :: Facelift Rear Bumper, Door Mouldings :: Irsmsher Front Air Da

ClarCE

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • Newbury, Berks
  • Posts: 735
  • Cam Covers x 5
    • View Profile
Re: HELP!
« Reply #9 on: 20 April 2007, 13:59:34 »
Woohoo Sorted!

Just phoned my local mechanic whose just started up on his own, he's got exactly what I need - he said he's ground a bit out of it so that it fits even better over the pulleys :D

Thanks for all the offers guys, much appreciated - the forum would have struck again there, and at least it should be tomorrow when Kevin and I get cracking on this swap over.. I cannot wait to drive it when done!

Cheers,

Chris.
Logged
So Far - :: Re-Finished Elite Wheels :: Black Leather Interior :: 3.0 Cams :: Chipped (REMOVED, EBAY SHI*E) :: Facelift Skirts ::
To Do   - :: Facelift Rear Bumper, Door Mouldings :: Irsmsher Front Air Da
Pages: [1]   Go Up
« previous next »
 

Page created in 0.012 seconds with 17 queries.