Topic: vectra abs fault (Read 1394 times)

henryd · « **on:** 07 June 2010, 14:04:23 »

I know its not a mig but a mate is having issues with his kelsey hayes equipped vectra,problem started when he noticed that the abs light did not illuminate on start up.
I plugged in my solus and faults were
abs ecu fault
o/s rear solenoid valve fault
He has obtained and fitted a known working unit but still no abs light and the scanner is showing no codes present,he has replaced the bulb with a new one so its not that so don't know where to go from here.
anyone ??

same #same# · « **Reply #1 on:** 07 June 2010, 14:36:07 »

have you checked the fuse?

henryd · « **Reply #2 on:** 07 June 2010, 14:44:17 »

checked fuses ,all ok

same #same# · « **Reply #3 on:** 07 June 2010, 14:47:46 »

is the plug fine, as rubber can go on them give the connections clean up.

henryd · « **Reply #4 on:** 07 June 2010, 14:59:40 »

main plug looks good but I think next step is to move rubber to see if contacts are corroded where I can't see

News:

Author Topic: vectra abs fault (Read 1394 times)

henryd

vectra abs fault

same #same#

Re: vectra abs fault

henryd

Re: vectra abs fault

same #same#

Re: vectra abs fault

henryd

Re: vectra abs fault