Topic: Vectra compression test results - (Read 1019 times)

JamesV6CDX · « **on:** 09 July 2007, 11:27:14 »

I have just been and done a compression test on the Veccy, and I can confirm that TD's garage diagnosed it correctly.

Cylinder 1: 225 PSi
Cylinder 2: 212 PSi
Cylinder 3: 0 PSi
Cylinder 4: 230 PSi

So they're all pretty much acceptable, apart from number three, which has no compression whatsoever.

No3. plug is black and sooty, from unburnt fuel obviously.

Seeing as it's not burning any oil, and there is zero compression at all in that cylinder, can we 100% say it's a valve problem?

Dazzler · « **Reply #1 on:** 09 July 2007, 11:40:26 »

If its not been smoking out the back, then yes i would say a burnt out valve(s) I have heard that LPG does do this after quite a long while. HTH.

Martin_1962 · « **Reply #2 on:** 09 July 2007, 11:48:01 »

It is head off whatever!

JamesV6CDX · « **Reply #3 on:** 09 July 2007, 11:49:25 »

Quote

It is head off whatever!

Oh yes... it will be off sooner than you think

Marks DTM Calib · « **Reply #4 on:** 09 July 2007, 11:49:38 »

OFF WITH ITS HEAD!

News:

Author Topic: Vectra compression test results - (Read 1019 times)

JamesV6CDX

Vectra compression test results -

Dazzler

Re: Vectra compression test results -

Martin_1962

Re: Vectra compression test results -

JamesV6CDX

Re: Vectra compression test results -

Marks DTM Calib

Re: Vectra compression test results -