Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Pages: [1]   Go Down

Author Topic: will this work  (Read 2194 times)

0 Members and 1 Guest are viewing this topic.

ANDY8

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • FAR FAR AWAY
  • Posts: 77
  • V6 POWER
    • View Profile
will this work
« on: 08 November 2006, 20:36:12 »
Hi

Do anyone know if this camshaft sensor will fot my 2.0 16v 1998 xev engine with 56.5 simtec ecu.


http://cgi.ebay.co.uk/CAM-SENSOR-CAMSHAFT-VECTRA-OMEGA-CAVALIER-CALIBRA-ASTRA_W0QQitemZ160048055864QQihZ006QQcategoryZ10404QQssPageNameZWDVWQQrdZ1QQcmdZViewItem



The trade club book has different numbers for the sensor

Thanks
« Last Edit: 08 November 2006, 20:37:15 by ANDY »
Logged

Taxi_Driver

  • Guest
Re: will this work
« Reply #1 on: 08 November 2006, 21:02:23 »
Dunno sorry....but had a look at the 'BOOK' and its about £30 +vat for the cam sensor on yours  :y
Logged

ANDY8

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • FAR FAR AWAY
  • Posts: 77
  • V6 POWER
    • View Profile
Re: will this work
« Reply #2 on: 08 November 2006, 21:11:49 »
Same book taxi driver  :)

Just wondering if i could have save a few quid thats all :y
Logged

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 34044
  • Git!
    • View Profile
Re: will this work
« Reply #3 on: 08 November 2006, 21:34:53 »
2.0 16V cam sensor - 93171450
Logged

Taxi_Driver

  • Guest
Re: will this work
« Reply #4 on: 09 November 2006, 07:33:41 »
Had a dig for you on the net.........it appears it should be ok.

http://www.vauxallparts.co.uk/index.php?product_id=113&option=Prod_detail
« Last Edit: 09 November 2006, 07:35:48 by Taxi_Driver »
Logged

mijfife

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Rosyth, Fife. Scotland
  • Posts: 295
  • AAARRRRGGGGGGGGG, IT'S WAS ONLY A GLS!!!!!!!
    • View Profile
Re: will this work
« Reply #5 on: 09 November 2006, 09:57:32 »
Hi, when I changed the engine on my 2ltr, the camshaft sensor had a different plug so I had to fit my original one. That might be why there are different part numbers??

Cheers Jim  
Logged
The fleet consists of a Singer Chamois Coupe, an Imp based kit car - BS Nymph, and a Kawasaki GPZ 900R (& a Toyota RAV4 LPG for the work horse!)

nixoro

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Hitchin, Herts
  • Posts: 2902
    • View Profile
Re: will this work
« Reply #6 on: 10 November 2006, 11:25:42 »
Not sure if this is any help to you but vx now supply the sensor with a new piece of loom/connector to it helping in the fitment of the new sensor.

As the sensor connectors are now different for whatever reason.
Logged

x25xe

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • Hayes, Middlesex
  • Posts: 915
  • Avater removed due to size
    • View Profile
Re: will this work
« Reply #7 on: 11 November 2006, 10:37:28 »
Hi,

The reason that the cam sensor plug is now different is because Vaux have modified it.  When I had my Cavalier (16V X20XEV engine) EML light diagnosed, it was the cam sensor (again).  The dealership replaced the sensor and informed me that it had been modified.  They cut the original plug off the loom and soldered the new sensor plug on.  Why could they not have terminated the end of the new plug wiring into a socket that would fit the old one????

Anyway, they made a bit of a hash of it and I had to do some tidying of the wiring, including cable tieing the loom so that it was not draping across the inlet manifold!

Is the sensor more reliable?  :-/  Only time will tell.

Hope this helps.
Logged
1998 2.5 V6 Omega CDX, Leather and Electric Pack!
Pages: [1]   Go Up
« previous next »
 

Page created in 0.01 seconds with 17 queries.