Topic: uneven idle on a 2.5 (Read 826 times)

deks · « **on:** 21 July 2008, 20:33:54 »

help needed !! uneven idle, this has got a little worse in a few days ,i have a 2.5 face lift model ,just had a new cam belt fitted a month ago by a good garage ,Anyone have any ideas for a novice !! cheers

Dazzler · « **Reply #1 on:** 21 July 2008, 20:36:04 »

Has it been like it since the belt was done or was it like it before?

mike213735 · « **Reply #2 on:** 21 July 2008, 20:59:33 »

Blocked Breathers?

deks · « **Reply #3 on:** 21 July 2008, 23:41:59 »

hi no it was ok after i got the belt done ,but only a week after it started ,just got a little worse over a few days , cheers

Ian_D · « **Reply #4 on:** 22 July 2008, 00:55:31 »

Maybe worth cleaning out the idle control valve... its pushed into the right side of the plenum as you look at the engine, with a pipe leading to the air pipes at the front of the throttle body.

deks · « **Reply #5 on:** 22 July 2008, 09:29:52 »

thanks for your help mate ,i will do that as soon as i get ready ,and i will clean the breathers out too . Thanks again

News:

Author Topic: uneven idle on a 2.5 (Read 826 times)

deks

uneven idle on a 2.5

Dazzler

Re: uneven idle on a 2.5

mike213735

Re: uneven idle on a 2.5

deks

Re: uneven idle on a 2.5

Ian_D

Re: uneven idle on a 2.5

deks

Re: uneven idle on a 2.5