Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please check the Forum Guidelines at the top of the Newbie section

Pages: [1]   Go Down

Author Topic: omega has no power  (Read 1104 times)

0 Members and 1 Guest are viewing this topic.

blue_dream

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Wellingborough
  • Posts: 226
    • View Profile
omega has no power
« on: 20 February 2009, 20:29:33 »
Good evening
                    Can some please help, replace cambelt on my omega due to possible tooth jump because she would not fire no fault codes listed, cambelt timing fine but looked bad so replace belt and tensioners and waterpump, turned over and ran after replacement, the next day the eml light on check codes by paper test codes 74 and 31, change crank sencer for code 31, unable to tell what 74 means, have replaced air flow meter about a year ago so that should be fine.
  Car will run and drive but when you floor the pedal the  car struggles, or about to stall, like weak mixture !!!
  I hope someone can help this car is becoming a pain and expensive and its needed to get to work.  :(
Logged

MutantCav

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Gainsborough
  • Posts: 2716
  • Smoke me a kipper - I'll be back for Breakfast
    • View Profile
    • Free Giffgaff Sim With £5 Free Credit
Re: omega has no power
« Reply #1 on: 20 February 2009, 20:32:37 »
Code 31 simply means no signal from crank sensor...most likely you did the test with the engine off...19 is crank sensor failure...

Sounds like possible airleak...although 74 is MAF sensor

Have you got oil in the plug wells?
« Last Edit: 20 February 2009, 20:41:06 by ShieldOfSteel »
Logged
http://giffgaff.com/orders/affiliate/tvpromo Get a free giffgaff sim running on O2 network
£5 free credit on first top-up
£5 gives you 60 mins, 300 texts & unltd calls and texts to anyone else on giffgaff

dbug

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Northants
  • Posts: 14279
  • Dont knock Linux!
    • Jaguar XJ 5.0V8 Portfolio
    • View Profile
    • Dbug IT Services
Re: omega has no power
« Reply #2 on: 21 February 2009, 01:11:36 »
What model/engine/year?

Check all elec and vac connections ok.

Was new crank sensor genuine Vx?
Logged
1972 Ferrari Dino, 1967 Triumph TR4A, Mondeo 2.0TDCi Estate, Jaguar XJ 5.0V8 Portfolio

Varche

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • middle of Andalucia
  • Posts: 13992
  • What is going to break next?
    • Golf Estate
    • View Profile
Re: omega has no power
« Reply #3 on: 21 February 2009, 11:24:28 »
Definitely worth checking carefully all of the vacuum connections. In particular have a look underneath the rubber connectors where the black plastic tube goes in. I had one that evaded finding at the back of the engine that operates the rear multi ram. It looked fine from above!

varche
Logged
The biggest joke on mankind is that computers have started asking humans to prove that they aren’t a robot.

blue_dream

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Wellingborough
  • Posts: 226
    • View Profile
Re: omega has no power
« Reply #4 on: 21 February 2009, 19:17:54 »
Hi guys
             1998 2.5 v6 ,Yes checked all vac pipes that i removed and cannot see anything wrong, cranksencer was NOT vaux, but it must be ok, car starts and drives but its just when you need to floor the pedal to pull off it thinks about it, temp gauge fine, everthing else fine, once driving duel carriage car drives fine, its like the car is running lean.   :-/
Logged

RobG

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol
  • Posts: 13831
  • I might have a link, pic or part number for that
    • 16 plate Mokka. Vivaro
    • View Profile
Re: omega has no power
« Reply #5 on: 21 February 2009, 20:01:24 »
Check connections to MAF
Logged
All that is necessary for the triumph of evil is that good men do nothing.

UPVC windows/doors/fascias/soffit/gutters supplied/fitted

iainb

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • West Midlands
  • Posts: 523
    • View Profile
Re: omega has no power
« Reply #6 on: 21 February 2009, 20:13:31 »
TBH. I would contact one of the admin's to get your on there Tech 2 diagnostic tool and go from there.
Iain
Logged

Entwood

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • North Wiltshire
  • Posts: 19566
  • My Old 3.2 V6 Elite (LPG)
    • Audi A6 Allroad 3.0 DTI
    • View Profile
Re: omega has no power
« Reply #7 on: 21 February 2009, 20:33:47 »
As Iain says .. you're very close to one in Northants .. a tech2 session will sort things out very fast .. and the guys that use them know what they are doing !!
« Last Edit: 21 February 2009, 20:39:36 by entwood »
Logged

blue_dream

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Wellingborough
  • Posts: 226
    • View Profile
Re: omega has no power
« Reply #8 on: 22 February 2009, 03:15:58 »
Hi
    Thanks guys, i will check this out  :y
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.032 seconds with 17 queries.