Topic: Rear wheel bearings (Read 627 times)

frankfaz2000 · « **on:** 25 April 2009, 07:02:19 »

I am changing rear wheel bearings on a 2.5 estate year 2000, As I put the bearing shaft back into the new bearing it is fine on the front/outer bearing but pushes out the rear/inner bearing and damages the seal and bearing.
I have wasted 2 new bearings at this stage and am about to try the third one as I need to get it back on the road.
Any advise would be welcome
Frank

sassanach · « **Reply #1 on:** 25 April 2009, 08:27:56 »

when i did mine i made a puller using a old wheel brg nut to pull the hub through the brg.

News:

Author Topic: Rear wheel bearings (Read 627 times)

frankfaz2000

Rear wheel bearings

sassanach

Re: Rear wheel bearings