Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Miggy24]

Right well still no luck with the car and iv put a new temp sender pin in started the car up and to me it sounded abit better and the orange light went out.Did it again and the light came back on and here are the codes i got

P0500      No Vehicle Speed Signal
P0340      Camshaft Sensor Incorrect Signal
P1502      Immobiliser No Signal
P1326      Knock Control Maximum Spark Limit Cylinder 1

[RobG]

Right well still no luck with the car and iv put a new temp sender pin in started the car up and to me it sounded abit better and the orange light went out.Did it again and the light came back on and here are the codes i got

P0500      No Vehicle Speed Signal
P0340      Camshaft Sensor Incorrect Signal
P1502      Immobiliser No Signal
P1326      Knock Control Maximum Spark Limit Cylinder 1

Seems like you`ve dislodged/damaged the knock sensor and camshaft sensor cables/connectors when you were working on the timing Rory. Re- check said cables/connectors, especially the cam sensor.

[TheBoy]

what are batt voltages at idle, and at 2500rpm

[Miggy24]

The battery voltage,Dont know but i know the battery was low so iv now got it on charge