Topic: Fault codes after HG change (Read 763 times)

ScottieMV6 · « **on:** 10 April 2010, 17:06:20 »

Thanks to the use of AndyB's cheapo tech 2 I have managed to clear all of the fault codes on my car. Ran it again for 5 minutes and the only one to re-appear is 46 - SAI Pump Voltage Low. To me this is a result in itself

However I want to get rid of the EML so that I know if I get another code in the future. I have checked everything - pump is plugged in, new solenoid fitted and wiring properly connected. The pipework in front of the engine is disconnected (because the one way valve was knackered) but all the pipes are blocked off. I have removed the relay and replaced with another and have removed the 50 amp fuse under the bonnet. All to no avail.

Help I am stuck now! :-/ :-/

feeutfo · « **Reply #1 on:** 11 April 2010, 06:24:58 »

bumped for replys from page 2

ScottieMV6 · « **Reply #2 on:** 11 April 2010, 10:23:57 »

Thanks Chris.

Maybe no-one has an answer?? Maybe I have found a problem that no-one has a solution to

RobG · « **Reply #3 on:** 11 April 2010, 10:41:50 »

With main fuse removed you`ll only get a code 46 if the wiring/connections to the solenoid is faulty. Need to doublecheck

ScottieMV6 · « **Reply #4 on:** 11 April 2010, 11:18:05 »

I am only assuming that it is the main fuse for the SAI pump as TB seems to think that the SAI pump was only fused under the bonnet post 1998 models and mine is a 1998.

I removed a 50 amp fuse located in the main relay box next to the battery. :-/

News:

Author Topic: Fault codes after HG change (Read 763 times)

ScottieMV6

Fault codes after HG change

feeutfo

Re: Fault codes after HG change

ScottieMV6

Re: Fault codes after HG change

RobG

Re: Fault codes after HG change

ScottieMV6

Re: Fault codes after HG change