Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Pages: [1]   Go Down

Author Topic: Mv6.  (Read 970 times)

0 Members and 1 Guest are viewing this topic.

Brikhead

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • West-Mids.
  • Posts: 1540
  • Sleeping. Do not disturb.
    • 2003 chitroen Saxo
    • View Profile
Mv6.
« on: 11 May 2010, 22:49:56 »

Hello all!
I'm trying to sort through a few issues with my 'new' 1999'T' Mv6 auto.
The brakes are not the best I've experienced and it could do with new pads and discs all round, I'll also be flushing through the fluid. The thing is I've noticed that some stockists offer vented rear discs, my car doesn't have these, should it? Are the callipers wider for vented discs?
My car has seen some welding action around the rear quarter at some point in it's history and it also seems to sit rather high at the rear end, I'm thinking that the rear subframe and suspension could have been swapped for a non-Mv6 set-up maybe? Could just be the fact the fuel tank is empty? It is located right at the rear of the car.

Also the car will judder sometimes when I brake, it feels like 'warped' discs but it doesn't do it every time the brakes are used. I had to do one track rod end for the m.o.t. (I replaced both sides) and this improved the juddering. I noticed the wishbones look a little used so intend on replacing them soon. Is there any thing else I should be looking at replacing whilst I'm at it!?

Thanks in advance, Rich. :y
Logged

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39762
    • ML350 TDM SmartRoadster
    • View Profile
Re: Mv6.
« Reply #1 on: 11 May 2010, 22:58:33 »

Quote
Hello all!
...... The thing is I've noticed that some stockists offer vented rear discs, my car doesn't have these, should it?   .....

Hi
Your car should have solid discs at the back, vented were fitted to the very last cars.  :y
Logged

tidla

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • solihull
  • Posts: 4097
    • View Profile
Re: Mv6.
« Reply #2 on: 11 May 2010, 23:08:27 »

Quote
Hello all!
I'm trying to sort through a few issues with my 'new' 1999'T' Mv6 auto.
The brakes are not the best I've experienced and it could do with new pads and discs all round, I'll also be flushing through the fluid. The thing is I've noticed that some stockists offer vented rear discs, my car doesn't have these, should it? Are the callipers wider for vented discs?
My car has seen some welding action around the rear quarter at some point in it's history and it also seems to sit rather high at the rear end, I'm thinking that the rear subframe and suspension could have been swapped for a non-Mv6 set-up maybe? Could just be the fact the fuel tank is empty? It is located right at the rear of the car.

Also the car will judder sometimes when I brake, it feels like 'warped' discs but it doesn't do it every time the brakes are used. I had to do one track rod end for the m.o.t. (I replaced both sides) and this improved the juddering. I noticed the wishbones look a little used so intend on replacing them soon. Is there any thing else I should be looking at replacing whilst I'm at it!?

Thanks in advance, Rich. :y

wobbly discs will wear the ends out quicker than normal.solid discs not that dear. :)
Logged

2woody

  • Omega Baron
  • *****
  • Offline Offline
  • Northumberland
  • Posts: 2374
    • View Profile
Re: Mv6.
« Reply #3 on: 12 May 2010, 09:21:53 »

I would suggest the following......

replace all four discs with genuine ATE ones bought from Euro Car Parts, or failing that with genuine Vauxhall ones. As OE, these cars were fitted with ATE.

adjust the pedal using the clevis pin and brake lamp switch. The clevis pin that attaches to the top of the pedal is adjustable, and pretty much always needs to be moved to eliminate slop in the pedal. Bear in mind that the brake lamp switch controls the "off" position, so you can pretty much choose the brake pedal position at rest to suit yourself. Don't forget to tighten the locknut on completion.

you will be surprised how much difference to pedal feel this makes. Omega B has just about the worst pedal feel of any car I've driven, so any set-up improvement makes huge differences.

I would not recommend.....

going for "improved" cross-drilled or grooved discs, they're nothing more than a fashion statement.

fitting the vented rear set-up to your car. It's designed to work with a different master cylinder AND EBD (electronic brake distribution) The rear piston sizes are larger, too, so it'll make an already rear-biased brake set-up worse.
Logged

Brikhead

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • West-Mids.
  • Posts: 1540
  • Sleeping. Do not disturb.
    • 2003 chitroen Saxo
    • View Profile
Re: Mv6.
« Reply #4 on: 23 May 2010, 13:21:27 »

I managed to sell my Vectra yesterday (Saturday) so was able to go to my local car spares shop this morning and pick up a few new parts...

Quote
I would suggest the following......replace all four discs with genuine ATE ones...
Thanks for taking the time to respond, however the only disks I could get hold of at short notice are made by 'Comline' for the front and 'Imap' for the rear. They seem good quality and the chap at the spares shop assures me they will be fine, also they are warranted for 12 months. I'll let you know if they turn out to be any-good.

I spent £215 and came away with pads and discs all round, handbrake shoes, 2 new wishbones, 2 droplinks, 1 litre of 5.1 brake fluid and a can of brake cleaner. All parts were in stock apart from the rear pads which I collect at 10 in the morning.

I'm about to make a start on the front end, lets hope I've been supplied the correct parts...

Any-one wanna wish me luck!?
 :y
Logged

pedroMV6

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • York
  • Posts: 1207
  • Der Metzgermeister
    • View Profile
Re: Mv6.
« Reply #5 on: 23 May 2010, 14:24:14 »

Not sure about the pre-facelift, but facelift MV6's have vented rear discs as standard, at least mine does. :y
Logged
Loving the Vectra C 2.2 diesel!

dbug

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Northants
  • Posts: 14279
  • Dont knock Linux!
    • Jaguar XJ 5.0V8 Portfolio
    • View Profile
    • Dbug IT Services
Re: Mv6.
« Reply #6 on: 23 May 2010, 15:54:38 »

Quote
I managed to sell my Vectra yesterday (Saturday) so was able to go to my local car spares shop this morning and pick up a few new parts...

Quote
I would suggest the following......replace all four discs with genuine ATE ones...
Thanks for taking the time to respond, however the only disks I could get hold of at short notice are made by 'Comline' for the front and 'Imap' for the rear. They seem good quality and the chap at the spares shop assures me they will be fine, also they are warranted for 12 months. I'll let you know if they turn out to be any-good.

I spent £215 and came away with pads and discs all round, handbrake shoes, 2 new wishbones, 2 droplinks, 1 litre of 5.1 brake fluid and a can of brake cleaner. All parts were in stock apart from the rear pads which I collect at 10 in the morning.

I'm about to make a start on the front end, lets hope I've been supplied the correct parts...

Any-one wanna wish me luck!?
 :y

You'll be changing your front discs and pads in a few thousand miles - pattern front discs no good on Omegas - advice as above buy genuine Vauxhall  :y  (I and many others say this from experience!!)

Good quality pattern discs should be ok for rears though.
Logged
1972 Ferrari Dino, 1967 Triumph TR4A, Mondeo 2.0TDCi Estate, Jaguar XJ 5.0V8 Portfolio

Elite Pete

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Chester
  • Posts: 19580
  • My spider senses are tingling
    • Audi SQ5 GSX1400
    • View Profile
Re: Mv6.
« Reply #7 on: 23 May 2010, 18:13:38 »

Quote
Not sure about the pre-facelift, but facelift MV6's have vented rear discs as standard, at least mine does. :y
Only the later one's do ;)
Logged
Retired

CaptainZok

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Bolton
  • Posts: 8093
  • Victim of Cyberbullying.
    • 3.2 MV6 Estate
    • View Profile
Re: Mv6.
« Reply #8 on: 23 May 2010, 19:11:33 »

Quote
Quote
Not sure about the pre-facelift, but facelift MV6's have vented rear discs as standard, at least mine does. :y
Only the later one's do ;)

The Countess' half did. ;D ;D
Logged
PM me for code reading/clearing
TuBy's new whipping boy.
Pages: [1]   Go Up
 

Page created in 0.036 seconds with 21 queries.