Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Search the maintenance guides for answers to 99.999% of Omega questions

Pages: [1]   Go Down

Author Topic: mv6 cambelts due  (Read 658 times)

0 Members and 1 Guest are viewing this topic.

gav mv6

  • Junior Member
  • **
  • Offline Offline
  • leicestershire
  • Posts: 186
    • m/f irmscher mv6 lpg
    • View Profile
mv6 cambelts due
« on: 09 June 2010, 19:59:39 »
shes due in 600 miles and im worried !!! , any advice greatly recieved , where best place to get the complete kit , what else do i need and how long will it take me , or is there anyone who can do it a reasonable rate ?

many thanks

gavin
Logged
Dam its hard work getting to 250 posts .......

Entwood

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • North Wiltshire
  • Posts: 19566
  • My Old 3.2 V6 Elite (LPG)
    • Audi A6 Allroad 3.0 DTI
    • View Profile
Re: mv6 cambelts due
« Reply #1 on: 09 June 2010, 20:04:49 »
You'll need the DVD, the CORRECT setting tools, and the full kit and about 4-6 hours if you've never done one.

Or, depending on your location (stick it in your profile .... saves being asked a zillion times  :)  ) there are folks on here who do them.

Elite Pete and Darth Loo Knee are 2 that come to mind

HTH

Pete = http://www.omegaowners.com/forum/YaBB.pl?action=viewprofile;username=7950554859636C5948593C0

Daz = http://www.omegaowners.com/forum/YaBB.pl?action=viewprofile;username=4764642660656E6E0B0
« Last Edit: 09 June 2010, 20:07:32 by entwood »
Logged

gav mv6

  • Junior Member
  • **
  • Offline Offline
  • leicestershire
  • Posts: 186
    • m/f irmscher mv6 lpg
    • View Profile
Re: mv6 cambelts due
« Reply #2 on: 09 June 2010, 20:12:19 »
Quote
You'll need the DVD, the CORRECT setting tools, and the full kit and about 4-6 hours if you've never done one.

Or, depending on your location (stick it in your profile .... saves being asked a zillion times  :)  ) there are folks on here who do them.

Elite Pete and Darth Loo Knee are 2 that come to mind

HTH

Pete = http://www.omegaowners.com/forum/YaBB.pl?action=viewprofile;username=7950554859636C5948593C0

Daz = http://www.omegaowners.com/forum/YaBB.pl?action=viewprofile;username=4764642660656E6E0B0


how much is dvd , the tools , and kit ?
im in leicester
travel to corby every day
thanks
Logged
Dam its hard work getting to 250 posts .......

tunnie

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Surrey
  • Posts: 37573
    • Zafira Tourer & BMW 435i
    • View Profile
Re: mv6 cambelts due
« Reply #3 on: 09 June 2010, 20:22:14 »
£3 for the DVD, locking kit you will need to borrow, what tools do you have?
Logged

gav mv6

  • Junior Member
  • **
  • Offline Offline
  • leicestershire
  • Posts: 186
    • m/f irmscher mv6 lpg
    • View Profile
Re: mv6 cambelts due
« Reply #4 on: 09 June 2010, 20:28:48 »
Quote
£3 for the DVD, locking kit you will need to borrow, what tools do you have?

im fine with the tools mate , just never done a 24valver before .
Logged
Dam its hard work getting to 250 posts .......

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39778
    • ML350 TDM SmartRoadster
    • View Profile
Re: mv6 cambelts due
« Reply #5 on: 09 June 2010, 20:33:22 »
Quote
...
im fine with the tools mate , ....

Easy enough then  ;) you need the locking kit otherwise it's just best  guess & a 30mm offset ring spanner for the eccentric adjusters.
Logged

albitz

  • Guest
Re: mv6 cambelts due
« Reply #6 on: 09 June 2010, 20:58:58 »
Or you could get the wandering mechanic (Darth Loo-knee)to do it while you watch and learn for next time. You may have to suffer his renditions of Prick Ghastly songs as he works though :y :D
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.028 seconds with 17 queries.