Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Psychoca]

I have just replace the leak off hose and discovered bubbles seaping from the base of Injector 2 (between block and injector)...

I was wondering how straight forward replacing the seals are?  I presume it is a case of removing the HP Pipes, leak off pipes, etc.  removing injector, clean threads, replace seal, return injector in place, etc...  (Being very careful around Injector 4)...

Is there a specific socket I need to use, or can I just use a long socket???

[hoofing it]

I have just replace the leak off hose and discovered bubbles seaping from the base of Injector 2 (between block and injector)...

I was wondering how straight forward replacing the seals are?  I presume it is a case of removing the HP Pipes, leak off pipes, etc.  removing injector, clean threads, replace seal, return injector in place, etc...  (Being very careful around Injector 4)...

Is there a specific socket I need to use, or can I just use a long socket???

heres how the injector looks stripped and what tools are required
http://www.omegaowners.com/forum/YaBB.pl?num=1264711544
I forgot to say the body has no seals only the copper washer at the base.
dead easy job to take out just like removing a sparkplug