Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[m6 flyer]

how do you put the glove box handle back on & how do you remove front ashtray drawer from dash very stiff to release need to use flat head screwdriver to get out at all times :-/

[Agemo]

There is a very good "How-to" on the glovebox handle, not sure about ashtray.

[charlie]

assuming its a facelift,ashtray insert out then one screw (you can see three, just take out  the one in the middle)

[same #same#]

open the ash tray and take out the tray, there is a cut out on the back put cross hed screw driver in and locate the screw, undo screw and wiggel the ash try and it should come out, to fix it you will need a long head flat head, pop the front off it clips on the side but mind the cig lighter as on a runner, when off wind the plastic bar with hand and screw driver 2-3 full turns leave the screw driver in the slots and refit to the rest off the sah tray in sink when all line'd up and screw driver falls out push it closed and see  if its working now, if not try again, if dose refit to the car.

[m6 flyer]

many thanks for your input 

[harpersimon]

my ash tray cigar lighter / power socket seems. for want of a better phrase, floppy. It still works fine, but seems to have come lose. Could it have come off the 'runners' that present it when you open the ash tray? I guess removing the ashtray as above will reveal ?

[same #same#]

it might be the spring do as above  there is a cog in middel were the spring is tightened they can slip off the cog and back on again and the sping will have to be reset.

[m6 flyer]

many thanks for the info now I have a fully working glove box at last and ash tray