Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to OOF

Pages: [1]   Go Down

Author Topic: HELP 3.0 Wont start after oil cooler change  (Read 814 times)

0 Members and 1 Guest are viewing this topic.

Filth_Mobile_Jim

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Cranbrook, Kent
  • Posts: 56
    • View Profile
HELP 3.0 Wont start after oil cooler change
« on: 22 November 2010, 11:45:10 »
Over the weekend, i changed the Oil Cooler, Rocker cover gaskets, transmission mount, and left hand engine mount, cleaned out the plenum and breathers and changed the plugs. Now ive filled up with oil and water and tried to start it. It cranks but wont fire. Ive taken a plug out and its covered in fuel, so fuel is ok. I put the plug in the HT lead and earthed it on the plenum. No spark. Ive checked all the obvious connectors, like maf and injectors but can find anything obvious. HELP!  :(
Logged

feeutfo

  • Guest
Re: HELP 3.0 Wont start after oil cooler change
« Reply #1 on: 22 November 2010, 11:49:03 »
Paper clip it for codes....?
Logged

feeutfo

  • Guest
Re: HELP 3.0 Wont start after oil cooler change
« Reply #2 on: 22 November 2010, 11:50:38 »
Logged

Filth_Mobile_Jim

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Cranbrook, Kent
  • Posts: 56
    • View Profile
Re: HELP 3.0 Wont start after oil cooler change
« Reply #3 on: 22 November 2010, 12:10:41 »
Ok, just done the paper clip test (thanks for the link), and it just returns the 12 and 31, nothing else, just those looped over. So i tried starting it again, and its just the same!
Logged

Welung666

  • Guest
Re: HELP 3.0 Wont start after oil cooler change
« Reply #4 on: 22 November 2010, 13:02:37 »
Double check all the plugs around the engine bay especially the cam sensor.
Logged

Filth_Mobile_Jim

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Cranbrook, Kent
  • Posts: 56
    • View Profile
Re: HELP 3.0 Wont start after oil cooler change
« Reply #5 on: 22 November 2010, 14:35:55 »
Sorted now. It was the small connector on the DIS pack. Must have popped off when i pushed the oil pipes out of the way!  :D
Logged

Welung666

  • Guest
Re: HELP 3.0 Wont start after oil cooler change
« Reply #6 on: 22 November 2010, 14:38:11 »
;D :y glad you're sorted now :y
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.035 seconds with 21 queries.