Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[speedy_ns]

Hi there! Can anyone tell me how could I find Coli pack torx bolts for z22xe: I Didn't get it with the car, coil pack is just inserted inside. Does anyone Know what kind of bolts would fit?? 

[tunnie]

odd they did not come with the car, do you know the history of the car and its engine?

Is it possible its had a head gasket change, and head from a 2.0 used? As that does not have holes for coil pack as it uses DIS pack instead

[speedy_ns]

No, Dis module ( coil pack) has died, and that's how i find out that there should bee some bolts. I need it 'cause old module died because off water. Probably wasn't standing as it should because there was no bolts that hold it in proper place. And there is hole in head gasket.

[tunnie]

check the scuttle to wiper join, as water can creep in here under the wiper and drip onto the cam cover.

Not sure if you can buy bolts separately  :-/

[speedy_ns]

I'll check. Could lack off bolts produse som damage on new coil pack, or should I just need to watch on oil and water leak inside??? Or it stands properly without them??

[Welung666]

It could allow the dispack to vibrate upwards slightly allowing water in to the plug wells. I should have a couple of dispack bolts here somewhere. They are M6 if you can source some locally

[speedy_ns]

Ok, thanks alot, I'll try to find some!