Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[ber5ien]

Hi,

I managed to read the codes from my omega 2.2 petrol b fl 2001 180k on the clock! + lpg.

Please see the following codes:

0130     P0130   O2 Sensor 1 Incorrect Signal 
0340     P0340   Camshaft Position Sensor Circuit No Signal
P0301 Cylinder 1 Misfire Detected 
P0302 Cylinder 2 Misfire Detected 
P0303 Cylinder 3 Misfire Detected
P0304 Cylinder 4 Misfire Detected
P0110  Intake Air Temperature Circuit

All air pipes cleaned new filters new spar plugs.

I have recently disconnected also the O2 sensor so that is why it showed me that as well.

The car take more fuel, 20mpg;/ and having problems during acceleration (power loss) it's not happening always.

I believe that the Cam sensor needs replacing.

Please advice

Thanks.

Best Regards
ber5ien

[PhilRich]

Clear the codes & take it for a short run, then see what codes return

[Proz]

Yep cam sensor needs changing ... i would change that first and take it from there .
use genuine Vx only 
Also you could check for oil in the plug wells

[ber5ien]

Thx guys. I will check it again.

Cheers.