Topic: A/C Blower Fan Relays (Read 1058 times)

mcw · « **on:** 28 March 2009, 19:37:41 »

The interior heater fan on my car, 1996 2.5 CDX with ECC, has decided it doesn't want to switch off at all even with the ignition off. To stop it I had to pull fuse F33. The wiring diagram shows two relays K6 and K7 which may be the cause of the problem. However, I cannot find them. Does anyone know the exact location of these so I can check them out ?

RobG · « **Reply #1 on:** 28 March 2009, 19:41:29 »

http://www.omegaowners.com/forum/YaBB.pl?num=1176560725

deaco · « **Reply #2 on:** 31 March 2009, 18:58:40 »

mcw...i have the same problem with my heater blower .Did you track down the problem .Does anyone know what the relay behind the glove box is..Thanks lads

mcw · « **Reply #3 on:** 31 March 2009, 22:52:14 »

Smart money is on the blower series resistor being u/s. It is a bit more than a resistor - I flicked the small plastic cover off and there is a pcb inside. Also the live feed to the resistor is a direct feed to the output to the motor so I presume the control circuit is u/s unless it controls on the -ve side. £100 to replace from http://www.vauxhallworldparts.com/partsearch/partdetail1.php?partid=463 .
Interestingly they call it a heater blower regulator which probably explains where the "relays" are.

Mark

News:

Author Topic: A/C Blower Fan Relays (Read 1058 times)

mcw

A/C Blower Fan Relays

RobG

Re: A/C Blower Fan Relays

deaco

Re: A/C Blower Fan Relays

mcw

Re: A/C Blower Fan Relays