Topic: Headlight adjustment (Read 1191 times)

Selseybill · « **on:** 20 September 2009, 15:13:15 »

On Friday had my headlights adjusted(projector type).The garage used the usual light box they use for the mot to set the lights but the near side seems very high.n/s on full beam i can see the tree tops and on the o/s it seems to be right.the lights have 2 adjuster screws on top,which one is the hight adjustment and to bring the beam down do i screw it clockwise or anti-clockwise.

Selseybill · « **Reply #1 on:** 20 September 2009, 17:02:43 »

any ideas

Welung666 · « **Reply #2 on:** 20 September 2009, 17:19:16 »

If they adjusted it and you believe it's wrong just take it back and make them do it again. Simples

Selseybill · « **Reply #3 on:** 20 September 2009, 17:22:10 »

Quote

If they adjusted it and you believe it's wrong just take it back and make them do it again. Simples

They didn't charge me and i always adjust them myself.Only had them do it because i have never adjusted projector lights before and though it may be different

Welung666 · « **Reply #4 on:** 20 September 2009, 17:25:25 »

Oh OK, that's slightly different then... 2 Allen bolts on top of the headlight. IIRC outer alters left/right and the inner adjusts height.

Selseybill · « **Reply #5 on:** 20 September 2009, 17:30:23 »

cheers,wait till it's dark and am off down the ally to play

News:

Author Topic: Headlight adjustment (Read 1191 times)

Selseybill

Headlight adjustment

Selseybill

Re: Headlight adjustment

Welung666

Re: Headlight adjustment

Selseybill

Re: Headlight adjustment

Welung666

Re: Headlight adjustment

Selseybill

Re: Headlight adjustment