Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[gsizoli]

Hi!

Behind the battey there are circle shaped connectors.
Is it possible that the oxygen sensor signal wire goes throgh on these? As I know in case of V6 engines (2.5, 3.0) the oxygen sensor signal wires connect to the 28 and 47 pins to the ECU by a multi pin connector. But in my case there are no signal on the pin 28....
 The ECU connector is ok, not corroed or something. And pin 47 is also OK.
I need to know the O2 wire goes throgh on the cicle shaped connectors or not?if yes than which connector and pin should I examine?
Br
Zoli

[Marks DTM Calib]

And the answer is no.....they go directly to the ecu.

The engine to body signsals plus gearbox box signals use the round connectors

[gsizoli]

Thanks, I'm dissapointed because it seems I'have a broken wire somwhere..it won't be easy to find it...  

[rustym95]

use the colour code to find the wires and test them with a meter, remember that before the ECU some of the wires join to other colours so will need to peal back the black tape to them, wires usely go about 3 inches from the plug if the copper wire has gone green would replace the hole wire as the wire will be weak, also look for cracks in the wire or cuts as this can cause faults.