Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[dubford]

so while i was at work today a couple of friends changed my blown autobox and replaced my rear main oil seal too (thanks lads). but.... when putting the gearbox back up they cought a 4 pin connector and pulled the wire out of the connector!!!  as my mate said " reather then guess witch hole they go into and run the risk of blowing somthin ive left them and u will have to find out witch pins that go in" .


so help !!!!!    ive got a diagram out the haynes and found a 4 pin connector and it says :
white - b
gray - c
black - a
blue - d

dont supose anyone :
A) knows if the coonnector has abc or d on it
B) has a pic of oune so i can see the wire colours??

thanks guys

[rustym95]

if you clean the other end of the plug that is attached ( not broken) it has the colour match,

[dubford]

couldnt cos it plugged into the gearbox its self but....

i ended up going to the bloke who sold me the box and cutting the connector off the loom in the scrap car and soldering that on colour for colour......

Still dont work though so think i might have been sold a duff box but going to put it on the tech2 first and see what it has to say

[rustym95]

ok see what comes up, could be the ecu for the box.