Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[plym ian]

just brought 2 headlights complete with ballasts want to know if it is hard to wire in as mine are just standered light units any help would be greatful. ian

[RobG]

I assume you bought the ballast connectors with a short piece of loom with the Hid`s :question. If yes, swap your level motors onto the hid`s (plug & play), two wires from ballast connectors (should be brown & yellow), splice them into your existing loom that carries the dip beam connector.

[plym ian]

I assume you bought the ballast connectors with a short piece of loom with the Hid`s :question. If yes, swap your level motors onto the hid`s (plug & play), two wires from ballast connectors (should be brown & yellow), splice them into your existing loom that carries the dip beam connector.

is that the bit that goes to the bulb :question

[RobG]

Nope. You need the connector & piece of loom that plugs into the ballast...........the bulb is fed from the ballast

[plym ian]

didn't get that bit but have got an hid kit that the ballasts have gone. looks like that sort of connection so i'll try that. cheers ian

[plym ian]

Tried the connector I had but didnt fit

[RobG]

Are the ones in my pic the correct connectors :question

[plym ian]

They look like the right ones its just the ones I've got doesn't fit cause they are from an after market kit that i thought might fit

[RobG]

Fiver posted if you want them Ian

[plym ian]

Ok pm me cheers rob

[RobG]

PM sent