Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[feeutfo]

So is the Telematics loom in situ now?

Yes it is. Waiting mixer and final connections. TB (and I ) was very impressed. He wants your baby's. 

Seriously though, very well done Andy. Excellent job, thank you.

[Lazydocker]

Yes it is. Waiting mixer and final connections. TB was very impressed. He wants your baby's. 

Does that mean you're off the hook for a while then?

[VXL V6]

  I'll make sure Mrs VXL V6 is always by my side to protect me!

[TheBoy]

As Gayboy said, the loom couldn't have been better.

The loom from the Telematics was pefect length, and there was plenty on the one fro the HU.

All went together seemlessly.  Only slight issue is there is a problem with the Mic, so might have to move a pin.

[VXL V6]

Good, glad it was OK, difficult to judge how far the boot end of the loom would end up at the front. Was limited by the cable I could obtain (used two prefacelift Autochanger cables)

I have some various bits left over from an old telmute lead so could probably make up another mic interconnect if required or if there is some spare shielded cable I guess we could hard wire it up.

Be interested to see if there is much cellular noise once it's all up and running.