Topic: Heads up re; fuel pump cover plate (Read 971 times)

RobG · « **on:** 11 November 2013, 16:14:34 »

Having discovered one of the pipes corroded & leaking on the fuel pump cover plate, phoned around and discovered that there are only 3 in the country and all at the Luton factory. Obviously there`s only 2 left now

so if anyone wants to check their pipes for possible corrosion I`d advise doing so now.

MR MISTER · « **Reply #1 on:** 11 November 2013, 16:15:41 »

Mark will simply manufacture a couple of dozen.

Marks DTM Calib · « **Reply #2 on:** 11 November 2013, 16:17:06 »

Not seen this happen for a while, we were advising greasing this area some time ago.

amba · « **Reply #3 on:** 11 November 2013, 16:22:30 »

Glad to hear you are sorted Rob

Bit like my saga with the rear brake pad retaining pins for the vented discs..none in the UK and 2 weeks from Germany

Suppose grease may prolong their life although being a flat surface its easy to see why they rust at the base.Possible a tick coat of Tetraseal

News:

Author Topic: Heads up re; fuel pump cover plate (Read 971 times)

RobG

Heads up re; fuel pump cover plate

MR MISTER

Re: Heads up re; fuel pump cover plate

Marks DTM Calib

Re: Heads up re; fuel pump cover plate

amba

Re: Heads up re; fuel pump cover plate