Topic: Exhaust and seat Questions (Read 1026 times)

RolandL · « **on:** 18 February 2014, 10:59:13 »

Greetings, In need of a bit of guidance.

Firstly I need to change the exhaust. I can get hold of a system including mounting kit, however I am unsure of what type of gasket is needed, (if any) where it connects to the Cats. Does it need a conical wire mesh one (like my Astra) or is it a ball and cup type (interference fit) ? Picture of system only shows bolts for connection. Need to know before I take it off so I have all parts

My second question is about the passenger seat. Seat heater is not getting hot. Have checked seat wiring/connectors, nothing obvious. Do they run off the same fuse as drivers side is ok.

Many thanks

05omegav6 · « **Reply #1 on:** 18 February 2014, 11:22:59 »

Nuts/Bolts and a smear of exhaust paste

Does the switch illuminate when you turn it on? If yes, fuse ok but seat element toast. Not uncommon, especially with leather seats $:-\$

RolandL · « **Reply #2 on:** 18 February 2014, 11:38:06 »

Quote from: Taxi Al on 18 February 2014, 11:22:59

Nuts/Bolts and a smear of exhaust paste

Does the switch illuminate when you turn it on? If yes, fuse ok but seat element toast. Not uncommon, especially with leather seats $:-\$

Excellent

Yes switch illuminates, are the elements easily obtained?

05omegav6 · « **Reply #3 on:** 18 February 2014, 16:48:55 »

In theory yes... I believe Lincs Robert is the master at fixing heated seats

Might be easier to fit a working seat from elsewhere, especially if your car has leather $:-\$

News:

Author Topic: Exhaust and seat Questions (Read 1026 times)

RolandL

Exhaust and seat Questions

05omegav6

Re: Exhaust and seat Questions

RolandL

Re: Exhaust and seat Questions

05omegav6

Re: Exhaust and seat Questions