Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[omega3000]

Epoxy cures all 

[05omegav6]

Epoxy cures all 

Unless you get the mixture wrong

[omega3000]

Epoxy cures all 

Unless you get the mixture wrong

 

[cem_devecioglu]

Epoxy cures all 

Unless you get the mixture wrong

normally it has a 1 to 4 hardener ratio.. but sometimes when using very small amounts its hard to measure ..  so from %50 to %30 or may be even unusual ratios were even tested.. it only changes drying times    also you can increase reducer ratio and it gives more smooth surface   if it doesnt flow  

[symes]

Epoxy cures all 

well if you wnt to epoxy chassis-fine--but you still got rusty/thinner/weaker metal underneath it

Blue

It's the new black.

this is color

[omega3000]

Epoxy cures all 

well if you wnt to epoxy chassis-fine--but you still got rusty/thinner/weaker metal underneath it

Blue

It's the new black.

this is color

Nice choice symes 

[cem_devecioglu]

Epoxy cures all 

well if you wnt to epoxy chassis-fine--but you still got rusty/thinner/weaker metal underneath it

Blue

It's the new black.

this is color

very nice color.. and its a hell of a lot of job to paint miggy..

[symes]

Epoxy cures all 

well if you wnt to epoxy chassis-fine--but you still got rusty/thinner/weaker metal underneath it

Blue

It's the new black.

this is color

very nice color.. and its a hell of a lot of job to paint miggy..

easier than building cars from piles of rust mate  and being mine can take all the time I want--no deadline

[RolandL]

Hi Webby the Bear,

  Interesting to see where your rust is. I'm having my rear arches done at the moment, got my repair panels from  http://www.carz2.co.uk part nos  Repair panel VX459BKAAR and VX459BKAAL , also a little work on the sills.  I had rust on two door bottoms, rather than try to clean up I decided to change them for some off a facelift only cost me £50 for two doors.  Took a while to change over the loom (mine is a min facelift '99, different connectors).

The underside will get cleaned up and then fresh underseal on. Then she's good for another few years.   

 

[Webby the Bear]

nice one mate  what are your chassis legs like?

[Rods2]

Hi Webby the Bear,

  Interesting to see where your rust is. I'm having my rear arches done at the moment, got my repair panels from  http://www.carz2.co.uk part nos  Repair panel VX459BKAAR and VX459BKAAL , also a little work on the sills.  I had rust on two door bottoms, rather than try to clean up I decided to change them for some off a facelift only cost me £50 for two doors.  Took a while to change over the loom (mine is a min facelift '99, different connectors).

The underside will get cleaned up and then fresh underseal on. Then she's good for another few years.   

Useful link, as they do estate rear panels. Not that I need any yet as mine are currently rust free, but I'm sure it will be only a matter of time. 

[RolandL]

nice one mate  what are your chassis legs like?

They are ok, little bit of surface rust where under seal has come off but no horror stories.  Underneath just needs a good clean and a re coat.