Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please check the Forum Guidelines at the top of the Newbie section

Pages: [1]   Go Down

Author Topic: Tech II Information Help  (Read 821 times)

0 Members and 1 Guest are viewing this topic.

iansoutham

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • SE London
  • Posts: 524
    • Omega 2.0 m/f/l est CDX
    • View Profile
Tech II Information Help
« on: 15 June 2014, 14:44:23 »
Guys, bit of a follow up from my previous posts, but I am after some guidance on the information and procedures from the following photo if possible please.

Car is as avatar, 1997/8 MFL estate (chassis date code W)



On this picture the glass break wires are showing as connected (can visually verify that) but it is showing the glass breakage as disabled? I am guessing that means deactivated? If so, how can I turn it back on? I have been through the menus but cannot find anything for changing from saloon to estate for example.

Also, the only fault code that appears on the diagnostics of the anti-theft system is that the horn is disconnected (yes, I threw the power-sounder away). Can I programme that out? The reason for this is that when I arm the car, the LED on the ultrasonics disable switch flashes fast as detecting a fault. That bugs me.
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 106969
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: Tech II Information Help
« Reply #1 on: 15 June 2014, 19:37:26 »
Alarm Horn is different to the Alarm Siren.

If it says the Alarm Horn is disconnected, then its referring to the Alarm Horn :)
Logged
Grumpy old man
Pages: [1]   Go Up
« previous next »
 

Page created in 0.013 seconds with 17 queries.