Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[mantaray]

Had to replace the leak of pipes on the omega yesterday, I noticed that with the engine running there was bubbleing in the spilt fuel around the injectors where they sit in the head. I am hoping that it is just a case of nipping them down in the head, but was wondering if any one has had the same problem.

[05omegav6]

Sounds like failing injector seals

[Marks DTM Calib]

Try nipping up as a starter or replace the injector seal on that injector (or if you are really stuck then re-anneal the copper washer and refit)

[TheBoy]

Hope its not the one with the piezo in, as that can be a bugger to remove  . No4 from memory.

[mantaray]

Thanks for advice.

It is 1 & 2 injectors that are the problem as far as I can see, but if replacing the seals on those 2 I will probable do all of them anyway. the car has done 175000 mile so probable need them all doing.