Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[MonzaGSE]

Ive got a problem with the door locks. Its the old infrared remote system and locking/unlocking/deadlock works fine with the fob, also works fine with key in the door. The problem is that sometimes when the car is unlocked i cannot push the door pins down to lock. All doors seem to be "frozen" with door pins up. They wont move. Other times the pins on all doors can easily be pushed down. But then they will be "frozen" in the locked position. I can Get the pins up again by pulling up the front passenger pin. Then all four comes up no problem. But if i try to pull up driver door pin or either back door they wont move. In either case all doors respond fine to fob and key in door. Is it the driver door motor or some switch in driver door thats the problem?

[chrisgixer]

If this was on one door, then yes door lock motor as the switches are in. The motor for that door.

But all door pins the same...?

(Bump)

[MonzaGSE]

Yes. All the same. But i was thinking maybe the driver door overrides the others. That at least the rear doors are just slaves?

[VXL V6]

Yes. All the same. But i was thinking maybe the driver door overrides the others. That at least the rear doors are just slaves?

That would be my take on it too.