Topic: electric windows (Read 1703 times)

davieboy0312 · « **on:** 20 May 2015, 17:43:05 »

Hi guys. Looking for help again. How can I get the window regulator up n down with doors on a bench. Have a front and rear spare door loom. Thanks in advance

davieboy0312 · « **Reply #1 on:** 09 June 2015, 07:15:14 »

Can anyone help?

05omegav6 · « **Reply #2 on:** 09 June 2015, 07:34:53 »

I suppose applying 12v to the motor is out of the question

Have a butchers of Haynes wiring diagrams for wire colours

davieboy0312 · « **Reply #3 on:** 09 June 2015, 07:41:03 »

Regulators and glass removed for painting. But they where closed when I removed. Just so I can put motor down. Fit regulator and glass then close window

05omegav6 · « **Reply #4 on:** 09 June 2015, 17:55:09 »

Quote from: davieboy0312 on 09 June 2015, 07:41:03

Regulators and glass removed for painting. But they where closed when I removed. Just so I can put motor down. Fit regulator and glass then close window

Refit as removed surely $:-\$

davieboy0312 · « **Reply #5 on:** 09 June 2015, 18:18:23 »

I am hoping that's the case. But a lot of regulators are under tension with the glass for a better seal. So looking for another way before car comes back

News:

Author Topic: electric windows (Read 1703 times)

davieboy0312

electric windows

davieboy0312

Re: electric windows

05omegav6

Re: electric windows

davieboy0312

Re: electric windows

05omegav6

Re: electric windows

davieboy0312

Re: electric windows