Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to OOF

Pages: 1 [2]  All   Go Down

Author Topic: Throttle sticking on but not when TC is off  (Read 5516 times)

0 Members and 2 Guests are viewing this topic.

aaronjb

  • Guest
Re: Throttle sticking on but not when TC is off
« Reply #15 on: 18 September 2015, 10:05:53 »
Quote from: Andy H on 18 September 2015, 08:32:07
It would make sense if switching TC off also disabled cruise control. The fact that someone has previously removed the cruise stalk makes me suspect that there is a short circuit (perhaps intermittent) in the wires to the cruise switches which is setting cruise when it is not wanted :-\

That's where my money would be.. Cruise is effectively 'stuck on'. Although I never tried the TC button with the cruise enabled to see if it also disabled cruise. Anyone with cruise able to test that for the OP?

To the OP: If you brake do the revs also drop? (As we know the clutch and brake should both disable cruise)
Logged

05omegav6

  • Guest
Re: Throttle sticking on but not when TC is off
« Reply #16 on: 18 September 2015, 10:28:30 »
Quote from: aaronjb on 18 September 2015, 10:05:53
Quote from: Andy H on 18 September 2015, 08:32:07
It would make sense if switching TC off also disabled cruise control. The fact that someone has previously removed the cruise stalk makes me suspect that there is a short circuit (perhaps intermittent) in the wires to the cruise switches which is setting cruise when it is not wanted :-\

That's where my money would be.. Cruise is effectively 'stuck on'. Although I never tried the TC button with the cruise enabled to see if it also disabled cruise. Anyone with cruise able to test that for the OP?

To the OP: If you brake do the revs also drop? (As we know the clutch and brake should both disable cruise)
Will try that later Whilst drifting around Asda car park on my way home...
Logged

aaronjb

  • Guest
Re: Throttle sticking on but not when TC is off
« Reply #17 on: 18 September 2015, 10:30:15 »
 ;D Now I know how you bent that wishbone, Al. Your secret is out!
Logged

STEMO

  • Guest
Re: Throttle sticking on but not when TC is off
« Reply #18 on: 18 September 2015, 11:57:14 »
It sounds to me as if TC is switching cruise on off. Either an electrical fault..or a Terbs fault.
Logged

Kevin Wood

  • Global Moderator
  • *****
  • Offline Offline
  • Gender: Male
  • Alton, Hampshire
  • Posts: 36452
    • Jaguar XE 25t, Westfield
    • View Profile
Re: Throttle sticking on but not when TC is off
« Reply #19 on: 18 September 2015, 14:30:11 »
TC wiring is often butchered on plod cars, so makes me wonder if that's somehow been confused with cruise wiring on replacement?

On a DBW system, throttle movement and pedal movement are monitored by 2 separate systems on each. If the throttle is remaining open when the pedal is released, it's because the ECU is doing it deliberately for some reason, otherwise it would revert to limp mode and log a fault code.

Something is triggering the cruise control, IMHO. Even more likely as the cruise stalk has been removed and there could be cruise wiring floating around behind the dash shorting to something.
Logged
Tech2 services currently available. See TheBoy's price list: http://theboy.omegaowners.com/

05omegav6

  • Guest
Re: Throttle sticking on but not when TC is off
« Reply #20 on: 18 September 2015, 15:50:23 »
Cruise switch wouldn't have originally been present... Could potentially be a dash out job to find the short between the cruise and Tc looms...

Mine had cuts on the brake switch loom, handbrake loom and two additional feeds for the ignition switch for the runlock, and cuts in the TC loom to the switch...
Logged

Andy H

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Auckland
  • Posts: 5533
    • Mazda MPV
    • View Profile
Re: Throttle sticking on but not when TC is off
« Reply #21 on: 18 September 2015, 15:55:51 »
Quote from: Harris K Telemacher on 18 September 2015, 15:50:23
Cruise switch wouldn't have originally been present... Could potentially be a dash out job to find the short between the cruise and Tc looms...

Mine had cuts on the brake switch loom, handbrake loom and two additional feeds for the ignition switch for the runlock, and cuts in the TC loom to the switch...
Would the run-lock only maintain a normal idle? or could it be used to set a fast idle to spin the alternator fast enough to drive all the flashing lights?
Logged
"Deja Moo - The feeling that you've heard this bull somewhere before."

Lazydocker

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Woodbridge, Suffolk
  • Posts: 18848
  • Constantly Bullied by a certain Admin
    • View Profile
Re: Throttle sticking on but not when TC is off
« Reply #22 on: 18 September 2015, 16:10:33 »
Quote from: Andy H on 18 September 2015, 15:55:51
Quote from: Harris K Telemacher on 18 September 2015, 15:50:23
Cruise switch wouldn't have originally been present... Could potentially be a dash out job to find the short between the cruise and Tc looms...

Mine had cuts on the brake switch loom, handbrake loom and two additional feeds for the ignition switch for the runlock, and cuts in the TC loom to the switch...
Would the run-lock only maintain a normal idle? or could it be used to set a fast idle to spin the alternator fast enough to drive all the flashing lights?
Normal idle only... Not a PTO ;)
Logged
Whatever it is... I didn't do it

C20det

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Belfast
  • Posts: 92
    • 02 3.2 v6 Special
    • View Profile
Re: Throttle sticking on but not when TC is off
« Reply #23 on: 29 September 2015, 20:58:33 »
I did get a throttle position /switch circuit malfunction code & I erased it hasn't returned. The only other codes I'm getting is the 02 Sensor heater circuit open (bank 1 sensor 1) & bank 2 sensor 1

Codes

0135-4
0135-8
0130-4
0150-4

Intermittent

Witch I still can't get to the bottom off  :-\
Logged
Pages: 1 [2]  All   Go Up
« previous next »
 

Page created in 0.024 seconds with 17 queries.