Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Steve B]

Well if you want Curry that much 

I do need work doing on the 3.2 now, which is:

- Replacement of faulty/dead lifter, I already have a bag of new ones. Kindly donated by Mr MasterDTM.   
- New Cambelt, which I already have too! It's a 3.0 one, but Master says the back plate can be switched over. 

I don't have a locking kit, plus I'm not too confident to strip down as far as the cams and remove them.

I need to my belt (it's overdue)  and I have the kit,  plus a teeny bit of experience changing them 

Let's find a suitable date to do them. . If we work side by side it'll go quick.

Sounds like a plan is appearing  You be ok with changing the lifters too?

I'm fairly free from now until Christmas, most weekends are available. 

Can fit three cars outside here on the drive at a push, although only one in front of the garage. I will probably trial cam cover gaskets Dbug has used, due to costs, as the millage on the 3.2 is very low at the moment.

I'd stock up the beer/drinks fridge in the garage 

Well if you want Curry that much 

I do need work doing on the 3.2 now, which is:

- Replacement of faulty/dead lifter, I already have a bag of new ones. Kindly donated by Mr MasterDTM.   
- New Cambelt, which I already have too! It's a 3.0 one, but Master says the back plate can be switched over. 

I don't have a locking kit, plus I'm not too confident to strip down as far as the cams and remove them.

If you have any spare ones left tunnie , wouldnt mind a few as mine is going to need doing at some point  Dont mind paying for them , or are you replacing the whole lot ?
Think im going to bite the bullet and keep this car what with all thats been spent on it 

I was advised to change the whole lot, I recall Master saying he thought it was one on passenger bank maybe. 

Best solution would be for me to swap all of mine out, then test them to find the faulty one. Then know rest are good. 

Once I've sorted mine, you are welcome to mine for free. Could sort some OOF postage out 

Meaning both sides 

[tunnie]

Could not be 100% sure which side it is, since the cambelt is being changed anyway and everything is off. Might as well, unless the suspect/dead one is very clearly identified early on.

[EMD]

Could not be 100% sure which side it is, since the cambelt is being changed anyway and everything is off. Might as well, unless the suspect/dead one is very clearly identified early on.

Should be with a bit of wood and press/feel for play