Topic: False low screen wash level message (Read 4506 times)

Andy B · « **Reply #30 on:** 02 February 2016, 23:21:49 »

Quote from: terry paget on 02 February 2016, 19:56:00

Thanks for advice. Not quite sure how to pop off the washer nozzle. Looks like it come in from above and are is retained by 2 tongues. ....

I assume you're talking prefacelift $:-\$

The 'tongues' are just squeezed together to remove them

05omegav6 · « **Reply #31 on:** 03 February 2016, 00:10:11 »

Quote from: terry paget on 02 February 2016, 19:56:00

Thanks for advice. Not quite sure how to pop off the washer nozzle. Looks like it come in from above and are is retained by 2 tongues. I have unclipped the cable, but the hose is still attached, and it looks tricky to remove, and to replace.
It would be much easier on the scuttle, where I see alternative mounts.

Use the alternative points on the scuttle... Scuttle of and the blanking element should be obvious...

Re route hose and wiring job jobbed

TheBoy · « **Reply #32 on:** 03 February 2016, 17:47:36 »

Scuttle jets, another penny pinching own goal for the GM bean counters

News:

Author Topic: False low screen wash level message (Read 4506 times)

Andy B

Re: False low screen wash level message

05omegav6

Re: False low screen wash level message

TheBoy

Re: False low screen wash level message