Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Shackeng]

I realise this is probably a ridiculous question, but is it possible to retro fit a PFL centre control panel, radio, AC controls etc, in place of the ludicrously complex FL one?

I assume its probably the wrong size anyway.

[X30XE]

Can't see why not. The shell is the same shape/size. They just made it uglier in every regard when they "facelift"-ed it 

You'd have to be certifiable to spend the time / money doing it mind 

[zirk]

Impossible task I reckon, your get stuck when trying to replace the Climate Panel.

[TheBoy]

I'd suggest this could be classed as "very challenging" at best.

[X30XE]

I realise this is probably a ridiculous question, but is it possible to retro fit a PFL centre control panel, radio, AC controls etc, in place of the ludicrously complex FL one?

I assume its probably the wrong size anyway.

** edit : I thought you meant the whole dashboard. Didn't read it properly 

[Doctor Gollum]

I realise this is probably a ridiculous question, but is it possible to retro fit a PFL centre control panel, radio, AC controls etc, in place of the ludicrously complex FL one?

I assume its probably the wrong size anyway.

** edit : I thought you meant the whole dashboard. Didn't read it properly 

The whole dashboard is the only way it will work, and needs the loom as well. World of pain springs to mind... that said, if you do go down this route, change the heater matrix whilst you're in there

Easier solution is to FL the exterior of a P/MFL estate. Job jobbed

[Shackeng]

I realise this is probably a ridiculous question, but is it possible to retro fit a PFL centre control panel, radio, AC controls etc, in place of the ludicrously complex FL one?

I assume its probably the wrong size anyway.

** edit : I thought you meant the whole dashboard. Didn't read it properly 

The whole dashboard is the only way it will work, and needs the loom as well. World of pain springs to mind... that said, if you do go down this route, change the heater matrix whilst you're in there

Easier solution is to FL the exterior of a P/MFL estate. Job jobbed

Thanks guys, yes I assumed it would be too challenging, but I would so like to have had my TD MFL panel in my FL 3.2 Elite. I've operated A/C panels that were more user friendly than my FL

[Doctor Gollum]

It's not that bad... Try a facelift Vectra... there's three ways of doing pretty much everything