Topic: MV6 Center tie rod and steering idler (Read 2979 times)

Doctor Gollum · « **Reply #15 on:** 02 November 2020, 17:27:01 »

It is presumed that the one on the car is of similar length to either of the presented options

Of course, if the OP had wanted a simple answer, they would already have measured their one rather than 'asking tinterweb'

gavlar001 · « **Reply #16 on:** 03 November 2020, 20:56:33 »

lol I will just measure it.Looked under there today i think steering idler is the 110mm one.Tie rods look a bit tired but on a long drive today no wheel wobble.Maybe its the tyre as the day before i checked all the tyre pressures.Will get the tyre checked over at a good little local place he said he can check the alloy as well. Got sticky stuff on the passenger door card and on some buttons does it just need cleaning off.Many Thanks gavin

Doctor Gollum · « **Reply #17 on:** 03 November 2020, 21:11:44 »

Wheel play is usually the outer track rod ball joints or the wishbone ball joints

Recent thread about cleaning the buttons.

News:

Author Topic: MV6 Center tie rod and steering idler (Read 2979 times)

Doctor Gollum

Re: MV6 Center tie rod and steering idler

gavlar001

Re: MV6 Center tie rod and steering idler

Doctor Gollum

Re: MV6 Center tie rod and steering idler