Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to OOF

Pages: 1 2 [3]  All   Go Down

Author Topic: Electric Shocks?  (Read 2435 times)

0 Members and 1 Guest are viewing this topic.

HolyCount

  • Guest
Re: Electric Shocks?
« Reply #30 on: 07 April 2009, 13:20:26 »

When I read the title I thought Debs was going to whip out her coil again (of the tesla variety)  ::)

Only had the domestic voltage shock when I was little and tried to prise the beads out of a live heating element in the living room -- when mum rushed in after hearing the bang she found me on the other side of the room behind the sofa  :o
Logged

Debs.

  • Guest
Re: Electric Shocks?
« Reply #31 on: 07 April 2009, 13:31:06 »

I take electrical safety VERY seriously here and when working anywhere on the farm`s electrical installation, I always make use of the SPST lockable-isolators in the meter tails of the 3 phase incoming supply......Using the safety premise:
"What isn`t there, can`t hurt me"

For our safety, we all might do well to have a quick read the safety advice this E.S.C pamplet:
http://www.esc.org.uk/pdfs/business-and-community/electrical-industry/BPG2_08.pdf
Logged

Debs.

  • Guest
Re: Electric Shocks?
« Reply #32 on: 07 April 2009, 13:35:09 »

Quote
When I read the title I thought Debs was going to whip out her coil again (of the tesla variety)  ::)

Only had the domestic voltage shock when I was little and tried to prise the beads out of a live heating element in the living room -- when mum rushed in after hearing the bang she found me on the other side of the room behind the sofa  :o

 ::) I`ll be whipping my coil out in mid-May.....so, I`ll have to be taking 'precautions' to avoid a shock. ;D
Logged

Lizzie_Zoom

  • Guest
Re: Electric Shocks?
« Reply #33 on: 07 April 2009, 14:02:31 »

Yes, I have had a good few over the years when working on 240v domestic circuits as an experienced amateur electrician from the age of 12 (taught by my uncle an LEB electrician), but I have learnt to instinctively and very quickly let go! ::) ::) ::)

What worries me is I have always enjoyed the sensation when the power goes up your arm! ::) ::) ::) ::)

One of my brothers at the age of 7 decided it was clever to stick a butchers skewer in an old round pin socket, and ended up with a very badly burned hand, but at least he lived due to it being an old radial system ::) ::) ::) ::).
Logged

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 34018
  • Git!
    • View Profile
Re: Electric Shocks?
« Reply #34 on: 07 April 2009, 14:44:29 »

Quote
I take electrical safety VERY seriously here and when working anywhere on the farm`s electrical installation, I always make use of the SPST lockable-isolators in the meter tails of the 3 phase incoming supply......Using the safety premise:
"What isn`t there, can`t hurt me"

For our safety, we all might do well to have a quick read the safety advice this E.S.C pamplet:
http://www.esc.org.uk/pdfs/business-and-community/electrical-industry/BPG2_08.pdf


Wise advice, its also worth noting that double isolation is preffered so trip the main breaker and the MCB of the sub circuit.

As an extra measure, I always connect an earth to the output side of the MCB. This is the same practice we used on real wiring (11KV+) and can also offer additional protection from surges and over volt conditions on the supply which can jump the breaker/contactor terminals (worthy of note if you are in a remote location Debs).

I have a short earth lead with crocodile clips on to do this job.
Logged

Debs.

  • Guest
Re: Electric Shocks?
« Reply #35 on: 07 April 2009, 16:14:35 »

Quote
Quote
I take electrical safety VERY seriously here and when working anywhere on the farm`s electrical installation, I always make use of the SPST lockable-isolators in the meter tails of the 3 phase incoming supply......Using the safety premise:
"What isn`t there, can`t hurt me"

For our safety, we all might do well to have a quick read the safety advice this E.S.C pamplet:
http://www.esc.org.uk/pdfs/business-and-community/electrical-industry/BPG2_08.pdf


Wise advice, its also worth noting that double isolation is preffered so trip the main breaker and the MCB of the sub circuit.

As an extra measure, I always connect an earth to the output side of the MCB. This is the same practice we used on real wiring (11KV+) and can also offer additional protection from surges and over volt conditions on the supply which can jump the breaker/contactor terminals (worthy of note if you are in a remote location Debs).

I have a short earth lead with crocodile clips on to do this job.

Ah...the wise old mnemonic:
S.I.D.E

Switch Off
Isolate
Damp
Earth
Logged

HolyCount

  • Guest
Re: Electric Shocks?
« Reply #36 on: 07 April 2009, 16:40:26 »

Quote
Quote
When I read the title I thought Debs was going to whip out her coil again (of the tesla variety)  ::)

Only had the domestic voltage shock when I was little and tried to prise the beads out of a live heating element in the living room -- when mum rushed in after hearing the bang she found me on the other side of the room behind the sofa  :o

 ::) I`ll be whipping my coil out in mid-May.....so, I`ll have to be taking 'precautions' to avoid a shock. ;D

 ;D ;D Rubber makes a good insulator !  ::)
Logged
Pages: 1 2 [3]  All   Go Up
 

Page created in 0.018 seconds with 17 queries.