Topic: How far out is this cam timing!!!! (Read 1104 times)

JamesV6CDX · « **on:** 27 March 2007, 01:10:10 »

This is very worrying... whoever timed this up needs to be shot...pic was taken with the locking tool in place on the crank... all cam pulleys were one tooth out!!!!!!!!!!

No wonder it had flat spots and wouldn't rev very high!!! bloody cowboys

At least it will go together timed up perfectly!!!!

TheBoy · « **Reply #1 on:** 27 March 2007, 09:07:20 »

Possibly someone didn't use a kit?

Or did, but got crank pulley 1 tooth out, and never turned crank over and rechecked?

Admin · « **Reply #2 on:** 27 March 2007, 09:12:44 »

I suspect Jaime is spot on with his diagnosis (or the muppet used the markings on the backing plate!).

JamesV6CDX · « **Reply #3 on:** 27 March 2007, 11:52:59 »

Quote

I suspect Jaime is spot on with his diagnosis (or the muppet used the markings on the backing plate!).

I agree too... I had one a tooth out before (but I rechecked, so no harm done!!)

Either way... what a muppet....

At least, this may account for why it didn't have much guts

News:

Author Topic: How far out is this cam timing!!!! (Read 1104 times)

JamesV6CDX

How far out is this cam timing!!!!

TheBoy

Re: How far out is this cam timing!!!!

Admin

Re: How far out is this cam timing!!!!

JamesV6CDX

Re: How far out is this cam timing!!!!