Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to OOF

Pages: 1 [2]  All   Go Down

Author Topic: Video of Smokey Astra...  (Read 4076 times)

0 Members and 1 Guest are viewing this topic.

JamesV6CDX

  • Omega Queen
  • *****
  • Offline Offline
  • Gloucestershire/Buckinghamshire
  • Posts: 16640
    • Omega 3.2 Retail MV6 LPG
    • View Profile
Re: Video of Smokey Astra...
« Reply #15 on: 20 July 2009, 00:05:08 »
Quote
Oil control ring James  :y

Get yourself a piston ring clamp ( http://cgi.ebay.co.uk/Snap-on-Piston-Ring-Clamp_W0QQitemZ110415424035QQcmdZViewItemQQptZUK_Hand_Tools_Equipment?hash=item19b545aa23&_trksid=p3286.c0.m14&_trkparms=65%3A12%7C66%3A2%7C39%3A6%7C72%3A2140%7C293%3A1%7C294%3A25 ) or split an old oil can and use with jubilee clips (don't laugh used this set up to re-ring tuned 2 Lit (overbored) MGB B-series engine!!).

Really easy to fit rings - once you've done a couple James  ;)

Thanks for the encouragement mate

It's like everything else

2.0 cambelt kit - scared stiff until I did one - and now done about 20+ for others

Same applies to V6 kit...

Same to head gaskets....

I'm sure once Ive done rings once, it will be a walk in the park second time around...  :y

Logged

Bourne

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Essex
  • Posts: 174
  • Stupid tiny glovebox !
    • View Profile
Re: Video of Smokey Astra...
« Reply #16 on: 20 July 2009, 10:41:23 »
If you decide to go down the route of changing the rings, I'd slip a new set of big end bearings in while it's apart.Won't cost much but will make it more worth the effort. :y
Logged

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 34044
  • Git!
    • View Profile
Re: Video of Smokey Astra...
« Reply #17 on: 20 July 2009, 11:59:24 »
Rings are easy enough to fit......sump off is the hardest part!

What state were the bores in?
Logged

JamesV6CDX

  • Omega Queen
  • *****
  • Offline Offline
  • Gloucestershire/Buckinghamshire
  • Posts: 16640
    • Omega 3.2 Retail MV6 LPG
    • View Profile
Re: Video of Smokey Astra...
« Reply #18 on: 20 July 2009, 13:02:08 »
Quote
Rings are easy enough to fit......sump off is the hardest part!

What state were the bores in?

They actually looked OK Mark - you could see the hone marks on them!
Logged

Bent valve

  • Senior Member
  • ****
  • Offline Offline
  • 0
  • Posts: 950
    • View Profile
Re: Video of Smokey Astra...
« Reply #19 on: 20 July 2009, 18:26:19 »
Does it have excess crankcase pressure? what happens if you run it with the oil cap loose/off?
Logged

JamesV6CDX

  • Omega Queen
  • *****
  • Offline Offline
  • Gloucestershire/Buckinghamshire
  • Posts: 16640
    • Omega 3.2 Retail MV6 LPG
    • View Profile
Re: Video of Smokey Astra...
« Reply #20 on: 20 July 2009, 18:37:40 »
Quote
Does it have excess crankcase pressure? what happens if you run it with the oil cap loose/off?

Quite a bit of blow back, with cap off...
Logged

Bent valve

  • Senior Member
  • ****
  • Offline Offline
  • 0
  • Posts: 950
    • View Profile
Re: Video of Smokey Astra...
« Reply #21 on: 20 July 2009, 21:25:18 »
Quote
Quote
Does it have excess crankcase pressure? what happens if you run it with the oil cap loose/off?

Quite a bit of blow back, with cap off...
Unless the breather system is blocked solid, it does sound like worn rings/bores. Easier to do than a v6 top end rebuild though IMHO :y
Logged

Pete Elite

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Uxbridge, Middlesex
  • Posts: 1749
    • View Profile
Re: Video of Smokey Astra...
« Reply #22 on: 20 July 2009, 22:43:59 »
 Just a thought James but if it's a Turbo could it be that at sometime the Turbo has gone and filled the exhaust with oil which wasn't cleaned out properly as you seemed pretty sure that it was the stem seals and the bores looked OK :-/.
Logged
Pages: 1 [2]  All   Go Up
« previous next »
 

Page created in 0.01 seconds with 17 queries.