Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to OOF

Pages: 1 [2]  All   Go Down

Author Topic: How do you find out ? ?  (Read 17497 times)

0 Members and 3 Guests are viewing this topic.

ANDY8

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • FAR FAR AWAY
  • Posts: 77
  • V6 POWER
Re: How do you find out ? ?
« Reply #15 on: 13 July 2006, 22:28:42 »
well i found out why the aircon had stopped working,   I must have gone over some rough terrain and pulled the plug completely off the compressor from underneath ,

A few solders later and its all back working again, Just in time for the weekend heatwave
Logged

markey mark

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • SLady bitshorpe north lincs
  • Posts: 4236
  • banned for repeatedly reneaging on deals.
Re: How do you find out ? ?
« Reply #16 on: 13 July 2006, 22:34:08 »
good result andy8 and free as well !! one job to do on mine is get the aircon system running  :(
Logged

ANDY8

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • FAR FAR AWAY
  • Posts: 77
  • V6 POWER
Re: How do you find out ? ?
« Reply #17 on: 13 July 2006, 23:13:44 »
I think its more trouble than its worth sometimes,,, But hey if its there you just got to have it working right [smiley=2vrolijk_08.gif]

Stress,   No1 killer
Logged

Matchless

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Nottingham
  • Posts: 1563
    • A white van
Re: How do you find out ? ?
« Reply #18 on: 14 July 2006, 09:33:54 »
Nixoro,

That sounds like a low pressure problem, cant hear it from here so hard to be sure [smiley=cheesy.gif]

Watch the compressor clutch plate carefully, if the pressure switch is cutting in and out you should see the compressor speed varying as the clutch engages or releases. You may even be able to see the clutch plate move slightly as it releases from the pulley then clamps to it again.

Logged

nixoro

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Hitchin, Herts
  • Posts: 2902
Re: How do you find out ? ?
« Reply #19 on: 14 July 2006, 09:38:11 »
Quote
Nixoro,

That sounds like a low pressure problem, cant hear it from here so hard to be sure [smiley=cheesy.gif]

Watch the compressor clutch plate carefully, if the pressure switch is cutting in and out you should see the compressor speed varying as the clutch engages or releases. You may even be able to see the clutch plate move slightly as it releases from the pulley then clamps to it again.


Shall have a look at the weekend, if its doing this am I right in thinking it just needs a regas.
Logged
Pages: 1 [2]  All   Go Up
« previous next »
 

Page created in 0.036 seconds with 17 queries.