Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Pages: [1]   Go Down

Author Topic: lumpy idle on start up  (Read 1007 times)

0 Members and 1 Guest are viewing this topic.

nixoro

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Hitchin, Herts
  • Posts: 2902
    • View Profile
lumpy idle on start up
« on: 12 August 2007, 16:26:56 »
As in the title really running out of options, intermittent starts from cold its really lumpy.

So far I have cleaned the throttle body and Idle Control Valve checked the breathers, I have also checked the plug wells and they are all dry so the lead ends are fine.

I have done the paperclip test and there is one code 0100 which is the MAF sensor but this code I think is from when I left the connector off by mistake after the Throttlebody and ICV clean.

I have read in places it could be the egr valve having a hissy fit can these be blanked or is it a replacement job.

Any Ideas would be much appreciated :y
« Last Edit: 12 August 2007, 16:57:11 by nixoro »
Logged

holey head

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • leeds uk
  • Posts: 411
  • i'm a new dad
    • View Profile
Re: lumpy idle on start up
« Reply #1 on: 12 August 2007, 16:48:52 »
have heard these can be blanked off but i replaced mine, had same type of problem at one point it sorted it. don't know how to blank them off but would be better if you could replace as then it'll keep engine as should be!
Logged
ouch my head hurts! i'll try and remember to wear my helmet next time i'm out on the quad!

nixoro

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Hitchin, Herts
  • Posts: 2902
    • View Profile
Re: lumpy idle on start up
« Reply #2 on: 12 August 2007, 17:00:20 »
Quote
have heard these can be blanked off but i replaced mine, had same type of problem at one point it sorted it. don't know how to blank them off but would be better if you could replace as then it'll keep engine as should be!

I think I may have a go at blanking it 1st as funds are tight but if that solves the problem then its a trip to vx to have my wallet emptied been looking and they are about £120 from ebay sellers so vx will probably be more :-/
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 107026
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: lumpy idle on start up
« Reply #3 on: 12 August 2007, 17:38:14 »
The MAF code should disappear soon if it was simply that you'd left it off.

However, I think you have an airleak somewhere, hence why its throwing the MAF code.
Logged
Grumpy old man

nixoro

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Hitchin, Herts
  • Posts: 2902
    • View Profile
Re: lumpy idle on start up
« Reply #4 on: 12 August 2007, 17:49:17 »
Quote
The MAF code should disappear soon if it was simply that you'd left it off.

However, I think you have an airleak somewhere, hence why its throwing the MAF code.

I had a leak from the ICV joint so I took the air intake off the other night to get at the ICV to re tighten the icv to the throttle body put everything back but forgot to reconnect the maf connector before restart like an idiot so shall see how it goes, all the jubilee clips I have double checked are nice and tight so hopefully its not leaking.

Give it 20 good starts and hopefully the code shall go, shall be re doing the test next weekend so hopefully it will have gone by then.

My main worry is the lumpiness at start up it doesn't do it all the time but its something to worry about.

The car itself runs fine tickover is steady and i'm getting pretty good mileage now that i'm doing 30mile a day for work    
instead of 5 mile a day with my last job.
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.009 seconds with 17 queries.