Topic: The Rubber seal thing. (Read 727 times)

SP_3.2 · « **on:** 19 September 2007, 12:41:35 »

Hi guys i know that this is going to be a bad description but I need to know the part number for the Rubber seal that goes on the back on the plastic part of the Breather. this is the part that you have after you have removed the ECO cover. It where the air comes out of from the Breather box and goes into the engine via a round recess with one hole ether side. Sorry for the poor description but don,t know the name.

Thanks

VXL V6 · « **Reply #1 on:** 19 September 2007, 12:47:56 »

It's called the 'Breather bridge to plenum seal'..... But I can't remember the part no!

SP_3.2 · « **Reply #2 on:** 19 September 2007, 13:07:23 »

Thank for that i will check it out,

Marks DTM Calib · « **Reply #3 on:** 19 September 2007, 13:39:17 »

The part number for that and the O rings are in the breather cleaning maintenance guide.

News:

Author Topic: The Rubber seal thing. (Read 727 times)

SP_3.2

The Rubber seal thing.

VXL V6

Re: The Rubber seal thing.

SP_3.2

Re: The Rubber seal thing.

Marks DTM Calib

Re: The Rubber seal thing.