Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[razzo]

Need to stop blinding pilots of low flying aircraft by lowering the beam, played with the adjusters on top of the headlights but nothing happened. Did the wall bit as mentioned by Mark but no joy
anyone help please
Steve

[hotel21]

HID's or plain projectors?

[razzo]

They are HID's

[hotel21]

You checked the beam adjusting rods on the FNS and RNS suspension arms?

[razzo]

Is a 97 so no rods on arms

[hotel21]

Is a 97 so no rods on arms

And still true HID's?  Always thought that if proper Xenons then the adjuster arms were mandatory.....

You got a level adjuster knob to the left of the headlight on/off switch?

[razzo]

They are proper Omega HID's & only has range level wheel next to dimmer wheel on the dash under the headlight switch

[hotel21]

If you do not have the level sensors on the nearside suspension arms but do have a range adjuster wheel next to the headlamp switch then I would suggest that they are plain projector lamps (perhaps fitted with aftermarket 'xenon' uprated lamps) but are not true HID's.

Adjustment is as per what you are doing already....

[razzo]

Thanks mate

[TheBoy]

it takes a lot of turns to make a difference as well