Parts needed?

[VX1]

Evening all,

Can some one let me know what the part numbers are for:

Plenum seals:
Waterpump:
Auxillary belt:
Thermostat and seal:
Cambelt Kit:

Paul  

[Tafty]

Probably tellling you how to suck eggs, but, would be better contacting the stealers with your engine no to get the definative list. However I recently did work on mine (2.6 facelift) and used the following numbers without any problem - your's maybe different

Breather Bridge to Plenum Seal                      90467543
Breather Bridge to Throttle O ring      90500983
Gasket Inlet bridge to head                      90501652
Gasket Inlet to Inlet Bridge                      90501653
Gasket Inlet to plenum (O ring Set 6 off)      9118135
Auxilliary Belt                                   93181720

Hope that helps :-/

[Marks DTM Calib]

Dont worry about these ones:

Gasket Inlet bridge to head                      90501652
Gasket Inlet to Inlet Bridge                      90501653
Gasket Inlet to plenum (O ring Set 6 off)      9118135

Never had to replace any yet!

Also, if this is a job to be done at the cambelt meet then, then I carry spares.

If doing the stat you also need the two O -rings that go onto the link pipe that joins the stat.

[VX1]

Dont worry about these ones:

Gasket Inlet bridge to head                      90501652
Gasket Inlet to Inlet Bridge                      90501653
Gasket Inlet to plenum (O ring Set 6 off)      9118135

Never had to replace any yet!

Also, if this is a job to be done at the cambelt meet then, then I carry spares.

If doing the stat you also need the two O -rings that go onto the link pipe that joins the stat.

Thanks Mark. You wouldn't happen to know what the part numbers are do you? Just so I can order them from the local stealer's, unfortunately we don't do anything like that where I work.   Getting the rest from work water pump, cambelt kit, stat and auxillary belt and antifreeze £54 the lot.

Paul  

[Marks DTM Calib]

Dont worry about these ones:

Gasket Inlet bridge to head                      90501652
Gasket Inlet to Inlet Bridge                      90501653
Gasket Inlet to plenum (O ring Set 6 off)      9118135

Never had to replace any yet!

Also, if this is a job to be done at the cambelt meet then, then I carry spares.

If doing the stat you also need the two O -rings that go onto the link pipe that joins the stat.

Thanks Mark. You wouldn't happen to know what the part numbers are do you? Just so I can order them from the local stealer's, unfortunately we don't do anything like that where I work.   Getting the rest from work water pump, cambelt kit, stat and auxillary belt and antifreeze £54 the lot.

Paul  

When you get the stat, make sure its the right one.

There are a lot of aftermarket catalogues that list the 2.0 one as fitting the V6 (is doesn't).

The numbers for the seals I dont have handy.

[andyc]

LET US HAVE A CHASSIS NUMBER AND I'LL SORT IT ALL OUTB FOR YOU

[VX1]

LET US HAVE A CHASSIS NUMBER AND I'LL SORT IT ALL OUTB FOR YOU

The only thing I haven't got is the stat and relevant o rings, if you could sort them out for me, would be appreciated.
Chassis number is

Make VAUXHALL
 Model-Series  
 Model OMEGA ELITE AUTO
 Year 1997-01-30
 Chassis No. W0L000027V1013740
 Engine No. 08140917
 Engine Model Code  
 Fuel Type PETROL
 Engine Capacity 2962
 Power (KW)  
 Transmission AUTOMATIC
 No. of Gears  
 Body Style 4 DOOR SALOON


Paul