Topic: facelift 2.2 petrol timing marks (Read 577 times)

andy_hocking · « **on:** 07 October 2008, 23:35:37 »

hi all i changed my timing belt and pullys recently but could possibly be a tooth out. car starts and runs fine but have power loss on hills.
does anyone have a diagram of timing marks please.

feeutfo · « **Reply #1 on:** 08 October 2008, 00:45:24 »

4 pot dvd in club shop? Any good? Are there no corresponding Marks on the back/ belt cover to line up with?

Andy B · « **Reply #2 on:** 08 October 2008, 00:54:28 »

As far as I can remember when i did SWMBO's Astra G 16v (similar engine) it was just a case of aligning the two cams' timing marks together & the crank timing mark & putting the belt on.

gwa · « **Reply #3 on:** 08 October 2008, 13:19:05 »

Serek, another member replaced my Cam Covers and Cambelt etc a couple weeks ago and there was a problem. The genuine Vx replacemnt Cam belt did not have the marks which made it more difficult to set-up. Anyway, he got another which had the marks and we used the Crank Kit supplied by The Boy.
We also changed the plugs and I bought 2 new DisPacks from fleabay. Did the complete oil & coolant things at the same time. All is now well.

News:

Author Topic: facelift 2.2 petrol timing marks (Read 577 times)

andy_hocking

facelift 2.2 petrol timing marks

feeutfo

Re: facelift 2.2 petrol timing marks

Andy B

Re: facelift 2.2 petrol timing marks

gwa

Re: facelift 2.2 petrol timing marks