Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Robmetaxa]

Hi, Just wondering if any of you guys can help with this issue i'm having, I,ve had a 2.6 v6 cd for nearly 5 years, been outstanding all this time, with only a wheel bearing and a thermostat that have caused problems, so apart from routine stuff, I have never needed to get under the bonnet!!
Well for the last week or so i've had problems starting, the engine will turn over, but nothing, changed keys, still no joy, engine managment light did go out for the few times this problem occured, after a period of about 20/30 mins try to start again and the engine starts with the flick of the key, until a few days later!! when we have the same again!!! now until last night the engine management light did go out, when you first put the key in the ignition, with the rest of the lights, but stays on, until the engine starts after about 20/30 again, then goes out!
Been reading some of the post on this site, and looks like a crankcase sensor problem maybe...... what do you guys think??
Thanks
Rob

[Darth Loo-knee]

Rob have a look at this link, follow the instructions then come back with any codes. That will help out mate.

http://www.omegaowners.com/forum/YaBB.pl?num=1189022687

[Elite Pete]

A daz said above, you will probably get a code 19

[Robmetaxa]

Cheers fellas, will get myself off and that!! catch ya in a while!

[Robmetaxa]

Right done the pedal trick test, and come up with code 0335, that seems to be the Cranksaft Position Sensor A Circuit Malfunction!!
so guys is it just an easy fix to replace the sensor?
Can you tell me where it is?
and is it one of those Vx parts only jobbies and do I need to take out a 2nd mortgage ta
Rob

[feeutfo]

genuine only, patern dont last, about 60 sobs.
Sensor is by the oil filter, look in behind pass front  wheel under door. Plug is rear of plenum re route the wire away from the exhaust, guide in maintenance, link below.

[Robmetaxa]

Cheers mate, will go and see if i can remove it and get myself doen to the Vx dealer ta
Rob

[feeutfo]

Cheers mate, will go and see if i can remove it and get myself doen to the Vx dealer ta
Rob

Yes, does help if you have the item to show them, there are  2 types possible for mine according to vx listings and they cant tell which, presume yours is same being similar drive by wire engine...

[Robmetaxa]

Just phoned them up, and thats what he has told me!! so think I will take it to them, one is about £45+vat the other £79=vat!! sods law it will be the expensive one!!lol

[Marks DTM Calib]

There is only one type on the 2.6

2.6/3.0/3.2 - 90540743 - £49.70 (retail) £44.78 (trade) £38.38 (trade club)

[Robmetaxa]

Thanks, think I will order that from Vx and get the motor to work, where it will be easier to get underneath, thanks for all the help and advice.
Rob