Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Marks DTM Calib]

May try something here. The part I want is Bosch 0280218054. £166.23+VAT.

There is one on Autotek, 0280218045, which he says will do the job...£45+carriage.....Hmmmmm :-/

Autotek ones are recond (i.e. washed!)

What about this one...

http://cgi.ebay.nl/ALFA-ROMEO-Air-flow-sensor-meter-156-V6-etc-gtv-24v_W0QQcmdZViewItemQQitemZ330164470827

Its new and its the correct part!

[STMO123]

May try something here. The part I want is Bosch 0280218054. £166.23+VAT.

There is one on Autotek, 0280218045, which he says will do the job...£45+carriage.....Hmmmmm :-/

Autotek ones are recond (i.e. washed!)

What about this one...

http://cgi.ebay.nl/ALFA-ROMEO-Air-flow-sensor-meter-156-V6-etc-gtv-24v_W0QQcmdZViewItemQQitemZ330164470827

Its new and its the correct part!

Looks good Mark. Cheers

[Elite Pete]

Next problem, the screws which hold the sensor in are five pointers. I dont have one. Rang Halfords,specialist tool sir, 5 to 7 days.

Try a small flat headed screw driver

[STMO123]

Next problem, the screws which hold the sensor in are five pointers. I dont have one. Rang Halfords,specialist tool sir, 5 to 7 days.

Try a small flat headed screw driver

Tried that Pete. They din't move straight away and I'm not risking making more work by rounding them out.

[Andy B]

Next problem, the screws which hold the sensor in are five pointers. I dont have one. Rang Halfords,specialist tool sir, 5 to 7 days.

Try a small flat headed screw driver

Tried that Pete. They din't move straight away and I'm not risking making more work by rounding them out.

I carefully used Vicegrips/Molegrips on the outside edge of the screw, when I changed my Astra's. You could always cut a slot in the top with a hacksaw for a flat blade screw driver.

[STMO123]

Couldn't see properly, it was actually a security torx bit. Sorted.