Topic: Front Camber - North of Watford Gap (Read 864 times)

Dave-C · « **on:** 07 March 2009, 07:46:50 »

I called Tony at W I M yesterday to pick his brains on the set up of the alignment for the Meega, as Mark DTM stated and not that I doubted him, Tony says camber needs to be 1 deg 10 as opposed to 1 deg 40 as VX didn't get it quite right in the start.

Taking mine to ABP Motorsport today, they're in Shavington, Cheshire.

So, I'll report back later. Tony is after somewhere to reccomend further North, so this'll be the tester. They do actually have a good reputation anyway.... but, we'll see...

DC :-/

feeutfo · « **Reply #1 on:** 07 March 2009, 13:23:08 »

maybe another addition to the oof map if it works out. :-)

Dave-C · « **Reply #2 on:** 07 March 2009, 15:24:21 »

Guys, Gals..

The outcome is good, they use Visualiner kit, that's Snap On to you and I.... the pods are WiFi linked to the computer, please see the printout for before and after readings, drives much straighter now.

Would I reccomend them ? YES! An excellent customer experience...

ABP Motorsport are here,

http://www.abpmotorsport.co.uk/abp-homepage

DC

News:

Author Topic: Front Camber - North of Watford Gap (Read 864 times)

Dave-C

Front Camber - North of Watford Gap

feeutfo

Re: Front Camber - North of Watford Gap

Dave-C

Re: Front Camber - North of Watford Gap